AC POWER CONDITIONERS
All your Hi-Fi components are connected to the power line along with every other electrical device in your house, and to every home and factory also using the power grid.
Power equipment on the AC line generates noise that travels back into the line where it enters your audio components. This noise is called electromagnetic interference or EMI. Light dimmers, refrigerators, and other household appliances put high-frequency junk in the AC line. Vacuum cleaners and electrical power tools are a major source of power-line noise because the fibres in the motors' brushes are continually making and breaking contact. The Line is also polluted by AM radio stations; power lines act as antennae, superimposing the AM signal over the 50/60Hz line.
All of these problems can be controlled with a well-designed AC power-line conditioner. They provide the optimum AC environment for your components so that they may realise their full potential. The sonic benefits of a good line conditioner include a "blacker" background, with less low-level grunge and noise. The treble often becomes sweeter, less grainy and more extended.
If you haven't tried a power-line conditioner, you may not have heard your system at its best.
AC POWER CABLES
Power cables have become very popular recently as more and more listeners discover their benefits.
The noise problems mentioned above can be reduced with careful AC cable design. Magnetic interaction and coupling between the conductors is reduced with dedicated audio power cables, resulting in better transfer of AC to the audio component.
|
Page 1
( Displaying 10 of 71 Products )
|
|
|
Chord PowerHAUS P6 Mains Distribution Block
|
|
Designed to reduce noise and improve the performance of hi-fi, home cinema and CI systems, the PowerHAUS P6 draws on Chord's expertise in wiring design, engineering and manufacturing techniques.
The PowerHAUS P6 follows the flagship PowerHAUS M6 and S6 distribution devices (launched in 2022) and continues the PowerHAUS philosophy of uncompromising design expertise, versatility, high-level build and proprietary ARAY noise-reduction technology.
|
|
Chord Epic Power Cable
|
|
Chord Company Epic Power is a high-specification mains cable for hi-fi and audiovisual systems. Hand-built in the UK, the design incorporates Chord's unique ARAY conductor technology, originally created for their flagship products but now enhancing the performance of their other ranges.
Epic Power is part of the widely acclaimed and extensive Epic range of analogue and digital interconnects, HDMI and speaker cables.
|
|
audiolab DC BLOCK 6
|
|
DC Block 6 - Direct Current Blocker
The DC Block 6 has been designed to improve the quality of AC electricity that feeds audio and AV systems.
Mains electricity has a fundamental influence on the audio signal as it passes through a system, from source to amplifiers to speakers. The mains supply in a typical home is subject to interference induced by a range of issues, causing the AC waveform to distort before it reaches each component. This creates noise in the audio signal, which degrades sound quality – a situation that continues to worsen with more and more electrical devices being added to the home mains supply.
|
|
Chord PowerHAUS M6 mains distribution block
|
|
Hand built in England by music and cinema lovers
Pure performance and reliability.
Free from non-essential and potentially noisy components
Created to meet our own demo room needs and now available for discerning users everywhere
Designed using the optimum materials and 40 years of hi-fi industry experience
Unique Chord Company ARAY technology minimises HF and earth noise
Protection from RFI via heavily-shielded ARAY wiring
|
|
Chord PowerHAUS S6 Mains Distribution Block
|
|
Hand built in England by music and cinema lovers
Pure performance and reliability.
Free from non-essential and potentially noisy components
Created to meet our own demo room needs and now available for discerning users everywhere
Designed using the optimum materials and 40 years of hi-fi industry experience
Unique Chord Company ARAY technology minimises HF and earth noise
Protection from RFI via heavily-shielded ARAY wiring
|
|
audiolab DC Block
|
|
Direct Current BlockerDC Block
The DC Block has been designed to improve the quality of AC electricity that feeds our audio and AV systems.
Mains electricity has a fundamental influence on the audio signal as it passes through a system, from source to amp to speakers. The mains supply in a typical dwelling is subject to interference induced by a range of issues, causing the AC waveform to distort before it reaches each component. This creates noise in the audio signal, which degrades sound quality – a situation that continues to worsen as the electrical devices we use in our homes proliferate.
|
|
Ringmat Power Cable Two
|
|
RINGMAT POWER CABLE TWO MAINS CABLE
RINGMAT POWER CABLE TWO MAINS CABLE is a sizeable mains cable with a length of 4-core Power Cable and a substantial Earth cable at its heart. The Power Cable is the 4-core version of the substantial 5-core connecting mains cable used in the Pure Power Mains Cable. As in the case of the Pure Power Mains Cable, considerable care has been taken through extensive listening tests to ensure that the Power Cable TWO is of complimentary and comparable quality. Again, every care has been taken in the design of this Power Cable TWO Mains Cable to avoid those conditions whereby sound signals dependent upon mains power are adversely affected, such as where the wrong polarity has been used, the wrong number of strands have been used in conductors and through the use of solder to secure connections - only screws have been used to secure connections. Those familiar with the use of the Pure Power Cable as speaker cable will be recognise the practice. As with the Pure Power Mains Cable, we have effectively used a 5-core cable structure throughout for the Power Cable TWO version, with a single Earth conductor and two conductors each for live and neutral whereby ‘opposite’ conductors are paired.
|
|
Ringmat Pure Power Cables
|
|
RINGMAT PURE POWER MAINS CABLE
The RINGMAT PURE POWER MAINS CABLE is a very considerable Mains Cable with a length of 4-core Ringmat OFC Pure Power Cable and a weighty Earth cable at its heart. Prototypes of this Mains Cable have been in use in Ringmat Developments’ test bed system for some years. As explained above, the results are awesome. However, there was a practical problem in bringing them to the market in that the thickness of the Pure Power Cable and the Earth Lead (up to 10mm²) meant that they could not fit into even the very largest versions of domestic or professional AC mains plugs or high power IEC plugs/sockets. These problems have now been solved by linking the very large conductors at the heart of the Mains Cable to another substantial 5-core ‘connecting’ Mains Cable of significant quality, via a recently developed and very neat 5-pole connector at each end. Although the ‘connecting’ Mains Cable is very substantial, it is possible to terminate it with traditional UK and international type mains plugs. The exceptional quality of the Ringmat OFC Pure Power Cable is well documented and considerable care has been taken through extensive listening tests to ensure that the other components are of complimentary and comparable quality. Every care has been taken in the design of this Mains Cable to avoid those conditions whereby sound signals dependent upon mains power are adversely affected, such as where the wrong polarity has been used, the wrong number of strands have been used in conductors and through the use of solder to secure connections – only screws have been used to secure connections. Those familiar with the use of the Pure Power Cable as speaker cable will be recognise the practice. We have effectively used 5-core cables throughout, with a single Earth conductor and two conductors each for live and neutral whereby ‘opposite’ conductors are paired.
|
|
PS Audio P12 Mains Regenerator
|
|
P12 Mains Regenerator
Features:-
•Built in Boulder
•1200 VA output
•3X lower impedance than P5
•8 outlets US
•15 amp AC input US
•120 volt regulated US
•Range 95 – 145 VAC US
•4 EU/AU/GR/UK outlets
•10 amp AC input EU/AU/GR/UK
•230 volt Regulated EU/AU/GR/UK
•Range 200 –285VAC EU/AU/GR/UK
•100% regenerated AC
•4 outlets
•MultiWave
•Pure Sine Wave
•Integrated oscilloscope
•THD meter
•Improvement meter
|
|
PS Audio P15 Mains Regenerator
|
|
The DirectStream P15 is the second largest high-end personal power generating station in the world, next to the P20. It is the successor of the venerable P10 Power Plant relied upon by thousands around the world. The P15 is all new, based on the P10, but rebuilt from the ground up. It features an ultra-low impedance analog power amplifier, pure DSD FPGA based sinewave generator, larger power supply, and the lowest distortion ever available in a Power Plant. The P15 is capable of powering any size system and bringing forth all that’s possible from your system ensuring you get the same great performance every time you listen.
|
|
Page 1
( Displaying 10 of 71 Products )
|
|
Search for products that may contain the words:
within
using