The secret to great lighting is being able to control it. Match your activity or mood to your visual environment. Set the lights as you need them and the setting is automatically saved as one of your custom scenes. Retrieve it later at the touch of a button; no individual switches or dimmers to adjust again and again. The possibilities are endless. In your living room, you can pre-set the lighting controls to suit the way that you live “Cinema”, “Homework”, “Entertaining”, “Cleaning”. Then with a hand-held remote control (or even your universal TV remote), you can change the ambience of your room without leaving your chair. You can control all the lights in one room or indeed the whole house from just one button and control natural light with a motorised window solution. You can also link the lighting controls to your security and AV systems.
Control Units have both a maximum power capacity limit per zone and a maximum power capacity limit per unit. Each zone cannot exceed the total Watts listed on the product, and each unit cannot exceed the total Watts outlined for the product. However, the maximum unit capacity can be allocated among each individual zone in the unit. For example, on a 4-zone unit at 230V with a maximum zone capacity of 800W and a maximum unit capacity of 2300W, some zones will not reach the individual zone maximum because the total unit maximum cannot exceed 2300W. Check total unit maximums before ordering
|
Page 1
( Displaying 10 of 102 Products )
|
|
|
Rako WK-HUB (WKHUB) Wired ethernet HUB
|
|
WK-HUB
WHAT IS IT?
A powerful network interface
for use with a Rako wired
system.
A network and cloud interface
and a link between Wired and
Wireless systems.
Time based functionality as
well as conditional logic and
advanced system features.
The WK-HUB can be free
standing or wall mounted,
using the bracket provided.
Network interface for Rako wired systems with built in
cloud services interface, time and advanced
programming features.
|
|
Rako RK-HUB (RKHUB) Wireless ethernet HUB
|
|
RK-HUB
WHAT IS IT?
A powerful network interface
for use with a Rako wireless
system.
A network and cloud interface
with time based functionality as
well as conditional logic and
advanced system features.
The RK-HUB can be free
standing or wall mounted,
using the bracket provided.
Network interface for Rako wireless systems with built
in cloud services interface, time and advanced
programming features.
|
|
Rako RNC-100 (RNC100) 10 Button NFC Programmable Push Button Module
|
|
RNC-100
An NFC programmable 10-Button wireless modular controller with 7 scenes, off and master raise & lower control for lighting.
The RNC100 wireless push button control module is programmable via NFC (Near Field Communication) using Rasoft Pro software and Rako's RAMPI interface. The RNC100 has the capability for each button to be customised allowing triggers for single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press, or release which gives a 'Press and Hold' function.
|
|
Rako RNC-070 (RNC070) 7 Button NFC Programmable Push Button Module
|
|
RNC070 - 7 BUTTON NFC PROGRAMMABLE PUSH BUTTON MODULE
WHAT IS IT ?
A wireless 7 button, push button
control module that has several
fixing options.
Lithium battery powered so can
be mounted anywhere without
having to run cabling.
Customisable and
programmable via NFC (Near
Field Communication) using
Rasoft Pro Software and Rako’s
RAMPI programming interface.
Based upon the widely used
50x50mm Euro Module switch
plate accessory standard.
|
|
Rako RLC Wireless Handheld Enclosure & Cover Plate Kits
|
|
RLC WIRELESS HANDHELD ENCLOSURE & COVER PLATE KIT
Two (RLC-020), three (RLC-030), six (RLC-060), seven
(RLC-070) or ten (RLC-100) button handheld cover
plate kit.
WHAT IS IT ?
The RLC range of handheld
cover plate kits offer a portable
alternative to the wall mounted
cover plate kits.
They are designed to fit a single
RCM/RNC wireless control
module.
Standard button configurations
are available covering lighting,
curtain/blind and combined
button configurations.
|
|
Rako WRA-232 (WRA232)
|
|
WRA-232
BI-DIRECTIONAL RS232 INTERFACE
WHAT IS IT?
A network interface for use with
Rako wired, wireless or
combined systems. The WRA-
232 Bridge acts as a bidirectional
interface with
external control devices via
either serial RS232 or Ethernet.
Audio-visual interface for bi-directional RS232 or
TCP/IP control of Wired and Wireless Rako systems.
OVERVIEW
The WRA-232 Bridge has two parallel bi-directional data connections,
RS232 and Ethernet. Messages received on either are repeated to both
Rako's wired and wireless network. Similarly, Rako network
transmissions (both wired and wireless) are re-transmitted on both the
RS232 and Ethernet ports.
|
|
Rako WLED150CV1
|
|
WLED150CV1
WIRED 150W CONSTANT VOLTAGE LED DIMMER.
WHAT IS IT?
A compact single channel
150W constant voltage LED
dimmer with in-built wired
receiver and Rako processor for
control of single channel
constant voltage LED fittings.
Controlled from any Rako
Wired device, e.g. WCM,
WAPIR or from wireless devices
via a WA/WTC-Bridge or a
WRB100.
Designed for use with single channel constant voltage LED fittings and
single channel LED tape light.
|
|
Rako WLED75CV1
|
|
WLED75CV1
WIRED 75W CONSTANT VOLTAGE LED DIMMER.
A compact single channel 75W
constant voltage LED dimmer
with in-built wired receiver and
Rako processor for control of
single channel constant voltage
LED fittings.
Controlled from any Rako
Wired device, e.g. WCM,
WAPIR or from wireless devices
via a WA/WTC-Bridge or a
WRB100.
The WLED75CV1 is a wired 75W constant voltage
dimming LED driver, suitable for ceiling or cupboard
mounting.
|
|
Rako WLED30CV4
|
|
WLED30CV4
The WLED30CV4 is a wired 4 channel,
30W/Channel (RGB+White) constant voltage dimming
LED driver, suitable for ceiling or cupboard mounting
Designed for use with 3 or 4 channel constant voltage LED fittings and 3
or 4 channel LED tape light with common +ve and individual -ve
connections. Maximum wattage of 120w when used as 4 channel or
90w with 3 channel for 12V d.c. fittings or 240w (60w per channel) for
24V d.c. fittings.
|
|
Rako WML-300 (WML300)
|
|
WML-300
A pluggable leading edge
dimmer module to be used with
the RAK8-MB.
The unit is plugged directly into
one of the slots on the RAK8-
MB.
The WML-300 can be used in
combination with any of the
other modules compatible with
the RAK8 allowing for greater
flexibility during both
specification and installation.
The WML-300 pluggable module is suitable for
Tungsten, Low Voltage Halogen and other leading
edge dimmable loads.
|
|
Page 1
( Displaying 10 of 102 Products )
|
|
Search for products that may contain the words:
within
using