|
Page 8
( Displaying 10 of 233 Products )
|
|
|
Amina Set of Shims
|
|
Shims
Shims available to allow alignment of speaker and backbox with any thickness plasterboard other than 12.5mm (1/2″) (or multi-layered build-up), ensuring that no more than 2mm plaster is applied to the front of a plaster-over loudspeaker.
May also be used for alignment in a retrofit installation or alignment of Edge Series speakers.
LOUDSPEAKER SHIMS:
These should be used where plasterboard thickness is greater than 12.5mm (1/2″), these will push the speaker forward.
|
|
Amina Mounting Blocks
|
|
4 mounting blocks for invisible loudspeakers where no back box is possible. Advise plasterboard thickness at time of order.
For use when there is insufficient cavity space for an Amina cavity backbox (less than 75mm). Allows installation of Amina loudspeakers into plasterboard with a rear cavity depth of just 30mm – Please note, rear of loudspeaker should be covered using soft insulation material where mounting blocks are used to prevent ingress of debris over time.
|
|
Amina SW345 Back Box
|
|
Solid Wall
Mounting option for solid block wall constructions
The BackboxSW345 is an easy to install mounting option for solid or block walls and ceilings for Amina Invisible Loudspeakers with the dimensions 345mm x 450mm – Please note, not suitable for installation of Edge Series loudspeakers.
Technical Specifications:-
Specifications BackboxSW345
Dimensions: 462mm x 358mm x 55mm
Weight: 2.8Kg
|
|
Amina APUi Single-Channel Protection Unit
|
|
In-line:
In-line protection unit for use with all low impedance Amina loudspeakers. Connected to the output terminal of the amplifier before the loudspeaker cable to allow maximum loudspeaker performance for a lifetime. Can be easily dressed back with any cable management system.
Compatibility:
Each unit contains an individual HPF and self-resetting thermal fuse specific to one particular loudspeaker model. Please ensure that the appropriate APUi is connected to each loudspeaker. See compatibility table below.
|
|
Amina APU-RSi (APURSi) Protection Unit
|
|
APU-RSi
Rack-Mountable Multi-Channel Protection Units
Compact Protection
Passive rack-mounted protection unit for Amina Invisible Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation. Either 8 or 16 channel options available.
Highly Flexible
With each channel containing a selectable HPF and self-resetting
|
|
Amina Mobius5i - Fully Covered Invisible Loudspeakers
|
|
Mobius5i
Inside Mobius5i
The Mobius5i incorporates OptiDamping, OptiDrive and Reduced-Resonance Exciter technology to give the smooth high frequency extension and low frequency performance, with medium power-handling capabilities.
The Mobius Soundboard
With an incredibly lightweight, stiff and resonant panel material, Mobius5i speakers are designed to work with the covering material to produce incredible high frequency detail and extension. When paired with a discreet subwoofer, Mobius5i speakers offer a full bandwidth high-fidelity audio system.
|
|
Amina Mobius7i - Fully Covered Invisible Loudspeakers
|
|
Mobius7i
Inside Mobius7i
The Mobius7i incorporates OptiDamping, OptiDrive and Reduced-Resonance Exciter technology. This gives smooth high frequency extension, high power handling and improved low frequency performance.
The Mobius Soundboard
With an incredibly lightweight, stiff and resonant panel material, Mobius7i speakers are designed to work with the covering material to produce incredible high frequency detail and extension. When paired with a discreet subwoofer, Mobius7i speakers offer the highest performance characteristics of any invisible loudspeaker.
|
|
Amina Edge7i - Invisible Loudspeaker
|
|
A revolutionary design for invisible loudspeaker technology, the Amina Edge offers smooth low frequency extension with increased power handling and sensitivity, resulting in a dynamic and engaging listening experience that has never before been heard from an invisible loudspeaker.
Building on the groundbreaking performance of the Amina’s Edge loudspeakers, the new i-series specification incorporates brand new Excelsior class high frequency drivers as well as Amina’s OptiDamping, OptiDrive, Reduced-Resonance Exciter technology and the new patented ToneRelief panel technology, all built into a plaster up-to design. These innovations result in even greater frequency extension and a much more linear response throughout the frequency range, improving on the already impressive performance of Edge loudspeakers
|
|
Amina Edge5i - Invisible Loudspeaker
|
|
Edge5i
Inside Edge5i
The Amina Edge5i offers smooth low frequency extension and increased low-mid performance, resulting in a dynamic and engaging listening experience that has never before been heard from an invisible loudspeaker. Building on the groundbreaking performance of the Edge5 loudspeaker, the Edge5i features brand new Excelsior class high frequency drivers as well as Amina’s OptiDamping, OptiDrive, Reduced-Resonance Exciter technology and the new patented ToneRelief panel technology all built into a plaster up-to design.
|
|
Tannoy iW210S Definition Install Speaker
|
|
DEFINITION INSTALL iW210S
10" Wall Mount Compact Subwoofer with Auxiliary Bass Radiator
Compact wall mount subwoofer for HiFi, multi-zone music and AV systems
Provides audiophile performance for a wide range of installation applications, including home theatres, media rooms, boardrooms and high end marine interiors
10” high efficiency bass driver with 88 dB/Watt sensitivity and 1,000 Watt peak power handling delivers exceptional low frequency performance
|
|
Page 8
( Displaying 10 of 233 Products )
|
|
Search for products that may contain the words:
within
using