AC POWER CONDITIONERS
All your Hi-Fi components are connected to the power line along with every other electrical device in your house, and to every home and factory also using the power grid.
Power equipment on the AC line generates noise that travels back into the line where it enters your audio components. This noise is called electromagnetic interference or EMI. Light dimmers, refrigerators, and other household appliances put high-frequency junk in the AC line. Vacuum cleaners and electrical power tools are a major source of power-line noise because the fibres in the motors' brushes are continually making and breaking contact. The Line is also polluted by AM radio stations; power lines act as antennae, superimposing the AM signal over the 50/60Hz line.
All of these problems can be controlled with a well-designed AC power-line conditioner. They provide the optimum AC environment for your components so that they may realise their full potential. The sonic benefits of a good line conditioner include a "blacker" background, with less low-level grunge and noise. The treble often becomes sweeter, less grainy and more extended.
If you haven't tried a power-line conditioner, you may not have heard your system at its best.
AC POWER CABLES
Power cables have become very popular recently as more and more listeners discover their benefits.
The noise problems mentioned above can be reduced with careful AC cable design. Magnetic interaction and coupling between the conductors is reduced with dedicated audio power cables, resulting in better transfer of AC to the audio component.
|
Page 6
( Displaying 10 of 71 Products )
|
|
|
PS Audio P5 PerfectWave Power Plant
|
|
The P5 is the second largest of our personal power generating stations, producing pure and perfect AC from a powerful analog based AC regenerator and is the power source of choice for almost any size system. Smaller than the P10, this workhorse should be the foundation on which you build your system when a P10 isn’t in the cards.
The P5 Power Plant takes in the old AC and, using an internal powerful class A/B power amplifier, generates new, low distortion AC in its place. Gone are the times when your system sounds better at night or during the day, with the P5 in place it will always sound great. The P5 has 4 separate regenerated zones and 1200 watts of pure regenerated power that can handle any size system you want to power. From medium to large power amplifiers to the smallest pieces of source equipment, the P5 will work magic on your system’s performance.
|
|
PS Audio PerfectWave P3 Power Plant
|
|
A complete AC power regenerating station for home audio or video systems. The P3 takes in the old AC and outputs new, rebuilt power with 3 separate regenerated zones and a 4th, high current filtered zone. From the biggest power amplifiers to the smallest pieces of source equipment, this product will work magic on your system’s performance.
The P3 is the smallest of our personal power generating stations, but don’t let that distinction fool you. The P3 produces pure and perfect AC and is the power source of choice for almost any size system. Smaller than the P5, this workhorse can be the foundation on which you build your system when a P5 isn’t in the cards.
|
|
PS Audio PerfectWave PowerBase
|
|
The PerfectWave PowerBase is a new product concept combining an isolation base and a power conditioner together in one elegant, component level product.
The need for both vibration control and clean power has been well established over many years yet, until the introduction of the PowerBase concept, no single engineered solution has effectively addressed both for high end audio equipment.
Place
|
|
PS Audio Dectet Power Center
|
|
PS Audio's very best entry level power center
The Dectet is an active three zone, ten outlet power center producing clean unrestricted AC power for an entire high-end audio or video system. Protection from surges, spikes and overloads, plus superior filtering and star wiring are incorporated in this power center to give maximum benefit to both audio and video systems with UK outlets.
Filtration
|
|
Chord C Power Mains Cable
|
|
The Chord C-power is a simple, straightforward and easy to hear upgrade to pretty much any component with an IEC input socket.
The C-power power cable follows the same design principles as every other Chord cable and that means attention paid to shielding, conductors and termination. We were lucky enough to work with a UK company that specialises in military grade power cable terminations, so the C-power is fitted with a high quality over-moulded mains plug and an equally high quality IEC plug.
|
|
Powerblok Pure Balanced Mains Units
|
|
The Powerblok series of AC Balanced Mains Transformers have been designed specifically for use in conjunction with high quality domestic audio systems for the specific purpose of improving sound quality.
Several types of noise and distortion are reduced with the use of these conditioners. The key parameter is the reduction of 'common mode' noise, that is noise and distortion that is equal to both the live and neutral wires on the incoming mains.
|
|
Naim PowerLine Mains Cable
|
|
With the launch of Naim's first custom designed and manufactured mains cable system, the most fundamental of all audio hardware items has hit centre stage. The Power-Line consists of a mains plug, a mains cable and an IEC connector. Each element incorporates features never before seen in an audio mains cable, and, like Naim's Hi-Line interconnect cable, the Power-Line represents a genuine advance in high-end audio engineering.
|
|
Mains Cable - UK Plug To Fig 8
|
|
LEAD UK PLUG TO FIG 8 BLACK 2m & 3m
Features
Voltage rating, AC:240V ac
Connector type A: UK Plug
Connector type B: Figure 8 Type Mains Lead
Length, lead:2m, 3m
Cable type:2-Core
|
|
Mains Cable - UK Plug to 10A IEC Socket
|
|
13A UK PLUG TO IEC SOCKET 1M, 2M, 3M, 5M, 6M cable lengths
Features:
Voltage rating, AC:250V
Connector type A:UK MAINS
Connector type B:IEC PLUG
Length, lead: 1m, 2m, 3m, 5m, 6m
Cable type:MAINS
Colour:BLACK
|
|
Chord Power Chord mains cable
|
|
The Chord Company Power Chord is fitted with a 13-amp fuse. This product is intended for use only with hi-fi and audio visual components.
High purity oxygen free copper conductors.
High performance high frequency shielding system.
Outer jacket designed to minimise mechanical noise.
The Chord Company Power Chord has been designed to improve the overall resolving power and dynamics of any hi-fi or audio visual component.
|
|
Page 6
( Displaying 10 of 71 Products )
|
|
Search for products that may contain the words:
within
using