|
Page 11
( Displaying 10 of 359 Products )
|
|
|
CYP PRO-SDIHDMI (PROSKIHDMI) SDI to HDMI Converter with SDI Bypass
|
|
PRO-SDIHDMI SDI to HDMI Converter with SDI Bypass
The PRO-SDIHDMI Converter accepts SD-SDI, HD-SDI, and 3G-SDI signals and converts to HDMI. The SDI input also has a bypass which is outputted simultaneously alongside the HDMI output allowing the SDI signal to be extended over distances up to 300m. This device also has the added benefit of an integrated audio de-embedder for sending 2-channel (L/R) audio to an AV amplifier.
|
|
CYP PRO-H2-3GSDI (PROH23GSDI) HDMI to 3G-SDI Dual Output Converter
|
|
PRO-H2-3GSDI HDMI to 3G-SDI Dual Output Converter
The PRO-H2-3GSDI Dual Output Converter accepts non-HDCP protected HDMI content and will convert to dual 3G-SDI outputs simultaneously. This is perfect for extending HDMI signals over long distances (300m for SD signals) to two displays. This device benefits from a 2-channel (L/R) audio input allowing DVI signals with 2-channel audio to be converted to SDI. In addition, the PRO-H2-3GSDI has a built-in EDID management system, with EDID recorder, which ensures the highest level of source and screen compatibility.
|
|
CYP IP-6000TX (IP6000TX) HDMI or VGA over IP Transmitter
|
|
IP-6000TX HDMI or VGA over IP Transmitter with USB support (4K, HDCP2.2)
The PU-IP6000TX transmitter allows you to transmit HDMI or VGA signals over CAT5e/6/7 network cable. This extender is multi-function transmitter that supports the transmission of Ultra High-Definition signals (up to 4K2K @ 30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.
|
|
CYP IP-6000RX (IP6000RX) HDMI or VGA over IP Receiver with USB support
|
|
IP-6000RX HDMI or VGA over IP Receiver with USB support (4K, HDCP2.2)
The PU-IP6000RX receiver allows you to receive HDMI or VGA signals over CAT5e/6/7 network cable. This extender is a multi-function receiver that supports Ultra High-Definition signals (up to 4K2K @ 30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.
The
|
|
CYP EL-41HP-4K22 (EL41HP4K22) 4-Way Advanced HDMI Switcher
|
|
EL-41HP-4K22 4-Way Advanced HDMI Switcher (4K, HDCP2.2, HDMI2.0, IR, RS-232, IP, Web GUI)
This 4-Way HDMI Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to a single HDMI display. This switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The EL-41HP-4K22 supports all the latest features of the HDMI 2.0 specification such as 4K UHD resolutions (4K2K @ 60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. In addition, this switcher also features an Auto-Switching function which detects the last active input and switches to this input automatically for display. The management of source/sink configurations can be easily controlled via the on-board WebGUI LAN control, IR remote control and RS-232.
|
|
CYP CR-CS2 (CRCS2) IP to Relay, IR, & RS-232 Controller
|
|
CR-CS2 IP to Relay, IR, & RS-232 Controller
The CR-CS2 is a simple Control System for a wide variety of connected devices. It has 16 user defined macro events stored within the unit activated via the WebGUI or by telnet, eight of which can also be activated by the external trigger connections. User defined macros can send commands to remote devices via Ethernet, IR (x4), relay trigger (x4), or RS-232/422/485 (x1) allowing for the control of a wide array of devices at the push of a button. An integrated IR code learning function is also available, allowing the user to store and re-transmit the IR codes sent by nearly any standard IR remote. Comprehensive user control interfaces are available including WebGUI, telnet and console (RS-232 in). Last but not least, the CR-CS2 supports Power over Ethernet (PoE) allowing it to be powered directly from a standard PoE network switch, without the need for an external power adapter, allowing for simple installation.
|
|
CYP AU-D6-H (AUD6H) USB Digital Audio Converter
|
|
AU-D6-H USB Digital Audio Converter with Stereo Headphone Output (384kHz/24-bit)
The USB Digital Audio Converter is specially designed to take the audio output from a USB Audio source such as a Laptop or PC and convert it to high quality analogue stereo for use with headphones or earphones. It utilises a superior USB Audio processor (xMos U8A) and digital-to-analog converter (DAC) with a maximum sampling rate up to 384kHz/24-bit and an integrated amplifier for a better frequency response to avoid signal loss. Microsoft Windows and Mac OSX compatible.
|
|
CYP AU-D250-4K22 (AUD2504K22) Advanced DAC with HDMI Switching
|
|
AU-D250-4K22 Advanced DAC with HDMI Switching and Audio Breakout (4K, HDCP2.2, HDMI2.0)
The AU-D250-4K22 is designed to integrate and convert both analogue and digital audio signals into any AV system. This device has an in-built sample rate converter which can upscale audio signals between 44.1kHz to 192kHz (24 bit). With 4K resolution support, HDMI2.0 and HDCP2.2 compliance, the AU-D250-4K22 also enables switching of up to 4 HDMI sources to a single HDMI output, and allows the user to embed or de-embed audio within the HDMI signal path. The AU-D250 not only provides a truly enhanced listening experience, but also the flexibility to manage all audio signals in your AV system.
|
|
CYP AU-D6-192 (AUD6192) USB Digital Audio Converter (192KHz/24-bit)
|
|
AU-D6-192 USB Digital Audio Converter (192KHz/24-bit)
The USB Digital Audio Converter is specially designed to take the audio output from a USB Audio Class 2.0 source such as a Laptop or PC and convert it to high quality 2 channel linear PCM optical digital output (TOSLink) for use with an external amplifier or active speakers with a optical digital input. It utilises a superior USB Audio processor (xMos U8A) with a maximum sampling rate up to 192kHz/24-bit providing an improved frequency response for better audio reproduction. Microsoft Windows and Mac OS X compatible.
|
|
CYP AU-D5D (AUD5D) Coaxial to Analogue Stereo Audio Convertor
|
|
AU-D5D Coaxial to Analogue Stereo Audio Convertor with Dolby® Digital & DTS® 2.0 Decoder
The AU-D5D is a digital to analogue converter (DAC) which allows the user to easily downmix digital coaxial signals to analogue stereo audio. The AU-D5D features Dolby Digital and DTS decoding allowing for seamless integration to any AV system.
•Dolby Digital and DTS downmixing
•Digital coaxial to analogue stereo audio conversion (DAC)
|
|
Page 11
( Displaying 10 of 359 Products )
|
|
Search for products that may contain the words:
within
using