Page 15
( Displaying 10 of 359 Products )
|
|
CYP PU-HBT-EX (PUHBTEX) 100m HDBaseT™ Repeater
|
|
The PU-HBT-EX repeater is designed to extend the signal transmission distances of CYP HDBaseT™ Extender sets and Matrix systems by allowing the user to repeat HDBaseT™ signals a further 100m over CAT5e/6/7 cable. This device features full 5-Play™ functionality, including the highest quality 4K2K uncompressed HD video, uncompressed multi-channel audio, bi-directional control systems (IR & RS-232), Power over Cable (PoC), and Ethernet (for LAN serving & IP Control). This Repeater is designed to be used with the PU-507 and PU-1109 point-to-point Extender Kits, the PU-8H8CTX & PU-8H8CTXIR 8-Way Transmitters, and with any CYP full HDBaseT™ Matrix system (PU-8H8HBT / PU-8H8HBTE / PU-4H4HBT).
|
CYP PU-DVI1109TX (PUDVI1109TX) DVI 5-Play HDBaseT™ Transmitter
|
|
This HDBaseT DVI over CAT5e/6/7 transmitter can transmit DVI video, analogue audio, 2 LAN serving connections, control (RS-232 and bi-directional IR) and Power over Cable (PoC) over a single CAT5e/6/7 cable up to 100m. The transmitter can power the PU-DVI1109RX receiver, via the PoC function, eliminating the need for a separate power supply.
Supports 3D formats and 4K2K resolution with HDMI to DVI adaptor
|
CYP PU-DVI1109RX (PUDVI1109RX) DVI 5-Play HDBaseT™ Receiver
|
|
PU-DVI1109RX DVI 5-Play HDBaseT™ Receiver (inc. PoC & 2x LAN, up to 100m)
This HDBaseT DVI over CAT5e/6/7 receiver can receive DVI video, analog audio, 2 LAN serving connections, control (RS-232 and bi-directional IR) and Power over Ethernet (PoE) over a single CAT5e/6/7 cable up to 100m. The PU-DVI1109TX transmitter can power the receiver, via the PoC function, eliminating the need for a separate power supply.
|
CYP EL-6010-4K22 (EL60104K22) HDMI/VGA/Display Port to HDMI Scaler
|
|
The EL-6010-4K22 is a multi-format scaler with HDMI, VGA, and DisplayPort inputs scaling to the HDMI output. Ideal for boardroom or classroom applications, this device is designed to enable an installer to scale the input from the connected source device to a HDMI resolution suitable for the connected HDMI display. The maximum output resolution supported is 4K @ 60Hz (YUV 4:4:4).
This unit also features a selection of adjustment options you are likely to need when accommodating different sources including a wide array of aspect ratio settings as well as contrast, brightness, saturation, hue, and sharpness settings directly on the device. In addition, the EL-6010-4K22 has an analogue speaker output for ease of integration when employed in conference centres, classrooms and public venues. The auto source detection feature is designed to switch to the most recently connected source automatically and to switch to another live input if the current one becomes disconnected. This unit is controllable via front panel controls (with OSD), WebGUI, IR remote, telnet and RS-232. These comprehensive control interfaces make operation easy and intuitive.
|
CYP EL-5400-HBT (EL5400HBT) HDMI/VGA/Display Port Presentation Switch
|
|
This HDMI/DisplayPort/VGA to HDMI Scaler with HDBaseT LITE Output is designed to switch and scale up to 5 AV inputs to simultaneous HDMI and HDBaseT LITE outputs at resolutions up to 1080p/WUXGA. The HDBaseT LITE output enables the user to send the signals up to 60m over a single CAT5e/6/7 cable and supports PoC (Power over Cable) to provide power to the connected HDBaseT LITE receiver (PU-515PL-RX or PU-515PL-WPRX). Additionally, this device offers 3 analogue Line level audio inputs, a switchable Microphone input and a Line level output. The microphone input features a 48V 'Phantom' power mode for use with professional microphones. The audio DSP engine provides auto-mixing and auto-gain control to mix or reduce the background audio in order to enhance the main audio source. The system can be controlled and easily configured via WebGUI, IR remote control or RS-232. This device is an ideal solution for presentation facilities within a classroom and/or conference room.
|
SpeakerCraft IRC-3.0 ALR - IR Receiver
|
|
Use in severe plasma or multiple CFL environments.
Small attractive case designed to sit on the surface of a cabinet or shelf.
Unique quad 3.5 mm mini-phone type connector
Requires regulated power supply; terminator block and emitters.
System status and IR activity LEDs
Exclusive ambient noise suppressor
Reduces the IR reception angle from 110 degrees to 60 degrees.
Allows close placement of receiver to plasma display or ceiling CFL units.
|
SpeakerCraft IRC2.1BK ALR - IR Receiver
|
|
The IRC-2.1BK ALR Mini IR Receiver with ambient noise suppressor, connects via four stripped conductor wires. Small unit designed to mount to the surface of a cabinet, TV set or wall
|
Xantech 782ERGPS High Current Power Supply
|
|
782ERGPS - High Current Regulated Power Supply
A high-efficiency power supply specified to provide power to all Xantech IR products. A versatile plug has a locking indentation ring providing a secure connection to all Xantech IR connecting blocks. A small form-factor allows tighter installation and reduces a clumsy rack-installation.
Input Power: 100-240VAC, 15W
Output Power: +12VDC, 1.25A
|
Parasound ZoneMaster ZRK Rack Kit
|
|
Features:-
•Hardware for mounting 2 half width ZoneMaster or Z Custom products side by side or a single product alone
•Fits in a standard 19" equipment rack
•1U high with feet removed
Technical Specifications:-
•10.25" Deep without cables connected (260mm)
•12" Deep with cables attached (305mm)
•19" Wide (483mm)
•1.75" High (1U) without feet (45mm)
•2" Height with feet (51mm)
Net Weight = 2.5 lbs (1.1 kg)
|
Xantech RC68X IR Remote Programmer
|
|
Xantech RC68X
Infrared remote programmer features more than 14,000 infrared codes
• Contains all the infrared codes necessary to operate all the Xantech infrared controlled components
• Use to program universal learning devices, such as Xantech remotes and keypads
• Infrared control code groups are adjustable within many Xantech components
• Requires two AA batteries (not included)
Weight .5Kg
|
Page 15
( Displaying 10 of 359 Products )
|
|
Search for products that may contain the words:
within
using