|
Page 16
( Displaying 10 of 359 Products )
|
|
|
Xantech CPL94B RF/IR Coupler
|
|
CPL94B - IR/RF Coupler
•Used to inject the Infrared control signals when used in conjunction with a TV coaxial RF cable.
•Has two "F" type coaxial jacks, one IR receiver 3.5mm mini stereo jack and one 2.1mm power jack.
•IR RCVR jack works with any Xantech IR Receiver having a 3.5mm stereo mini plug.
CPL94B RF/IR COUPLER
•Used to extract the IR control signals when used in conjunction with a TV coaxial RF cable.
|
|
Xantech CPL10 - RF/IR Coupler
|
|
CPL10 - IR/RF Coupler
•Used to extract or inject IR control signals when used in conjunction with a TV coaxial RF cable.
•Has two "F" type coaxial jacks and one IR out (or in) 3.5mm mono mini jack.
|
|
Xantech RT8 - Eight-Port Addressable IR Router
|
|
RT8 - Addressable one-in/eight-out Router
The RT8 Router is a ONE-IN/EIGHT-OUT IR switcher. It directs an infrared control signal to any one of 8 output ports or all 8 as a group. It is intended for selective control of up to 8 TV monitors (or any other
A/V product) from control locations using Xantech IR Receivers and /or SmartPads. The "I" and "G" output ports provide the ability to drive LEDs placed at each controlled device location so that you can see which device is being addressed at any given time. The RT8 responds to the Xantech RC68+ (or RC68) commands and is Code Group changeable by the installer.
|
|
Xantech 079144 One-Zone Amplified Connecting Block
|
|
79144 - One Zone Ten Source Amplified Connecting Block
•Emitter port jumpers permit high or low power IR outpout
•High-speed opto-isolator for improved operation
•Parallel emitter ports drive 10 single or 10 dual emitters
•Contains red LED input signal Test-IR
•Requires either the 781ERGPS or 782ERGPS Power Supply
•Dimensions: 6" x 2 1/4" x 15/16" (153mm x 58mm x 24mm)
•Up to nine 790-00's can be connected to the 791-44 for control of up to 100 devices in a single zone
|
|
Xantech 79000 Multiple Emitter Connecting Block
|
|
Xantech 79000 Multiple Emitter Connecting Block
•Emitter expansion block for the 791-44 or 792-10
•Parallel emitter ports drive 10 single or 10 dual emitters
•Contains a series 100-Ohm resistor per emitter port
•Emitter and IN/OUT ports are 3.5 mm mono mini-jacks
•Screw terminals provide for wired input connections
•Requires the 792-10 Power Module or the 791-44 Amplified Connecting Block to drive the 790 block
|
|
Tivoli Audio ConX - Wireless Transmitter and Receiver
|
|
ConX makes it possible to connect your other devices to the ART by Tivoli Audio collection. The ConX allows you to wirelessly transmit audio to any ART by Tivoli Audio speaker from any receiver, turntable, or even tapedeck via the standard 3.5mm stereo input.
Prefer to convert your old speakers into a part of your ART by Tivoli Audio system? Use the standard 3.5 mm audio output and control your system via the Tivoli Audio app.
|
|
Key Digital 12" Female to male HDMI Jumper cable (KEY-IQ-JUMP-12FM)
|
|
•Enables additional MCP35™ multi-function control ports on Key Digital® Digital IQ Series™ HDBaseT/HDMI via CAT5e/6 Matrix Switchers:
- 8 on KD-HD4x4Lite, 12 on KD-HD6x6Lite, and 16 on KD-HD8x8Lite
•Supports up to 75 ft. cable runs with all Champion Series™ HDMI Cables
•Used at Source and Display end of Key Digital® Champion Series™ HDMI Cables to insert & extract IR or RS-232 control
•Supports
|
|
Key Digital HDMI Extender Booster & Buffer (KEY-HD-FIX22)
|
|
•Extension: Capable of extending UHD/4K and 1080p resolution up to 75 ft. / 23 m. in and 75 ft. / 23 m. out (150 ft. / 46 m. total)
•HDMI Correction: Resolves common HDMI integration obstacles such as HDCP, EDID, HPD, and audio breakout
•Resolution Support: Supports all SD, HD, and VESA resolutions up to Ultra HD/4K, 3D and 1080p/60 (60Hz & 50Hz)
•4K/Ultra HD: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4 or 60Hz at 4:2:0.
|
|
|
|
|
|
|
|
|
|
|
£ 12.00
* |
|
|
| * Only available for purchase in-store |
|
Xantech HL85BK Universal Hidden Link Standard Range Kit Black
|
|
Control up to Four Audio/Video Components via Infrared (IR) Using this Shelf-Top IR Repeater System
•Use your IR remote on components behind closed doors or walls
•IR receiver has an attractive case for shelf-top locations
•IR receiver talk-back LED confirms commands
•IR receiver accepts IR commands from up to 30 feet away
With the Xantech HL85BK Designer Hidden Link IR Receiver Kit, there is no longer a need to leave entertainment cabinet doors open simply to use your IR remote control. The Hidden Link Designer IR Kit makes it possible to control up to four different audio and video components behind solid doors or walls using your existing IR remote. The included Hidden Link compact, black shelf-top IR receiver was designed to be the only visible piece of equipment. The included connecting block supplies power to the IR receiver using the included power supply. The connecting block receives IR signals coming from the IR receiver and distributes the IR signals out to your audio and video components using the included designer IR emitters. The use of this kit will leave you with the clean lines of your entertainment center without looking at unsightly stacks of equipment and cables. You can continue using your existing IR remote with the confidence it will communicate with your AV equipment behind doors and walls.
|
|
Page 16
( Displaying 10 of 359 Products )
|
|
Search for products that may contain the words:
within
using