|
Page 17
( Displaying 10 of 359 Products )
|
|
|
Xantech HL85B Universal Hidden Link Standard Range Receiver
|
|
Shelf-Top IR Sensor Makes IR Distribution a Breeze to Install
•Designed to work with LCD displays and CFL lights
•Ideal for placement on a shelf-top or a cabinet near a TV
•IR frequency bandwidth within 25 - 60 kHz
•Receives IR signal up to 80 feet
•Talkback LED
The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. It includes an IR receiver and a CB12 Connecting Block. The Hidden Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the CB12. It can also be plugged into the "AUX" or "IR RCVR" jack of other Xantech connecting blocks, such as the models 789-44, CB60, and 791-44. The Hidden Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable - as when installing the Hidden Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.
|
|
Xantech 283TPD Visible Designer Emitter With Twin Plug
|
|
Xantech 283TPD Visible Designer Emitter With Twin Plug
• 283D Visible Designer Emitter with two 3.5mm plugs
• Allows control of single source by two IR systems
• Diode isolation for independent control and component protection
• Wire length: 10 feet
|
|
Xantech 282TPD Designer Emitter With Twin Plug
|
|
•282D high-output Designer Emitter with two 3.5mm plugs
•Allows control of single source by two IR systems
•Diode isolation for independent control and component protection
•Wire length: 10 feet
|
|
Xantech 286D Designer Dual Blink Emitter
|
|
286D
• Two emitters in series with each other and terminated in a single 3.5mm mono mini plug
• Length of wire: 7 feet to junction, 3 feet to each emitter
286D10P - Dual Visible Designer Emitter Ten Pack
Package contains (10) 286D Visible Designer Emitters
|
|
Xantech CB18 - Strip-IR Parallel Connecting Block
|
|
•Easily connects home run wires from multiple IR Receivers to the input
•High current design (12 Amps peak) allows amplifiers rated as high as 500 watts to be used with the CB18
•One-in eight-out or eight-in one-out capability
•Nine four-terminal plug-in connectors on 4-conductor bus
•Screw terminals handle wire sizes from 24 to 12 gauge
•Dimensions: 111/4" x 1 1/4" x 1 1/4" (286mm x 32mm x 32mm)
|
|
Xantech CB12 - One-Zone Connecting Block
|
|
•Connects one emitter port and power supply to Xantech IR Receivers that use a stereo mini plug
•Also includes a three-terminal block for wired connection of Xantech IR Receivers and Smart Pads
•3.5 mm stereo mini jack for quick-connect IR receivers
•3.5 mm mono mini jack for one single or one dual emitter
•2.1 mm coaxial power jack
•Requires either the 781ERGPS or 782ERGPS Power Supply
•Dimensions:
|
|
Xantech ML95 - Universal Micro Link Extended Range Receiver
|
|
DESCRIPTION
The Micro Link IR Receiver is a small peep-hole style infrared repeater
assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and
a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR”
jack on the connecting block, such as the models 789-44, CB60, and 791-
44. The Micro Link IR Receiver is primarily intended for use in installations
where the connecting block is within reach of its 7-foot cable – as when
installing the Micro Link IR Receiver in a cabinet where the controlled
equipment is behind closed doors.
|
|
Xantech EN85 Universal IR Receiver Kit
|
|
The EN85K Ensemble is a convertible IR Receiver Kit that can be adapted to almost any surface mount, flush mount or shelf mount application. It includes all of the parts necessary for installing a single-room IR Repeater System for controlling a TV, Audio/Video Receiver, Blu-ray player, Cable Box, Satellite Receiver...just about any IR controlled A/V home entertainment device.
The kit includes an IR Receiver that can be attached to the front of a TV, or extended from behind with the TV Mount Adapter on flat panel TVs that have a minimal frame around the display area. The receiver can also be adapted to low-profile shelf-top placement with the Tabletop Adapter or inconspicuously mounted in a cabinet door with the Flush Mount Adapter for controlling IR components hidden in an equipment cabinet.
|
|
Xantech DL85 - LCD/CFL Proof Dinky Link IR Receiver
|
|
DESCRIPTION
These small IR receivers have been designed for mounting in very small
spaces. They may be mounted under shelf edges, cabinet ledges, in wall
speakers, etc. – anywhere an inconspicuous appearance is desired. The high
sensitivity of these receivers allows placement behind speaker grilles and still
receive IR commands up to 80 feet away*.
FEATURES
• Wire channel for clean installation.
|
|
Page 17
( Displaying 10 of 359 Products )
|
|
Search for products that may contain the words:
within
using