A subwoofer or a sub is a loudspeaker dedicated to reproducing low-frequency audio or bass. The typical frequency range for a subwoofer is about 20 to 200 Hz and below 80 Hz in THX-approved systems. Subwoofers are often used to augment the low frequency range of loudspeakers covering higher frequency bands only, such as satellite loudspeakers. With satellite loudspeakers becomming more popular and their physical size ever decreasing subwoofers play an important role in giving home cinema systems their full range sound. Passive subwoofers have a subwoofer driver and enclosure and they are powered by an external amplifier. Active subwoofers are more common and include a built-in amplifier.
|
Page 9
( Displaying 10 of 259 Products )
|
|
|
MJ Acoustics Pro 80 Mk I Subwoofer
|
|
Pro 80 Mk1
When the Pro 50Mk3 was released there was only one observation from the design team when putting the final touches to this landmark model in the history of MJ. “will a larger version be even better?” Well, the answer was a resounding YES!! This gave rise to the release of the Pro 60Mk1 with larger cone area and larger cabinet. So how do you better this?
You take this platform and add the ability to make very accurate adjustments so that in multiple subwoofer systems you can properly tune them with repeatable settings that can be stored in non-volatile memory. You then push the boundaries as far as possible within the financial contraints of affordablity and extract the most output possible by tweaking the power available along with enhanced filters and crossover layout. All this achievable, because the microprocessor within the DAMP circuits monitors system status very carefully to make sure that the purest of output emanates from the cabinet without the slightest hint of distress or distortion in the waveform. It’s quite a marvel to listen to.
|
|
MJ Acoustics Pro 60 MK I Subwoofer
|
|
Pro 60 Mk1
When the Pro 50Mk3 was released there was only one observation from the design team when putting the final touches to this landmark model in the history of MJ. “will a larger version be even better?” Well, the answer is a resounding YES!! proportionally its the same diminutive size given the increase from 10″ to 12″ cone. So with the required tweaks in filter design to accommodate the natural roll off characteristic changes in the cone from the slightly increased mass together with larger internal cabinet volume, we established a magnetic structure and Gauss setting for the motor assembly that extracted the very most from this Bass Engine without the need to increase power by more than a few watts. The efficiency of the motor assembly was honed to perfection and the legendary Twin Crossovers installed to complete the design. Once again we set the standard for the most sound for pound you can achieve in a small cabinet.
|
|
Niles NIL-SUB-10 (NILSUB10) 10 inch In-Ground Subwoofer
|
|
NIL-SUB-10
10" In-Ground Subwoofer features a waterproof HDPE enclosure which is dunk tested before shipment to ensure against leaks. The port and canopy assembly is designed to move air in an even 360-degree pattern. The critter-proof aluminum mesh grill cover allows for maximum air flow while protecting the entire port assembly against bugs, animals and debris.
•10” (250mm) Mica-injected Polypropylene cone woofer with NBR Surround
|
|
Wharfedale SW-12 (SW12) Subwoofer
|
|
SW-12
The SW series of subwoofers offer a level of performance previously unheard of in their class. Revolutionary drive units, amplifier modules and filter stages feature on every model. They strike the perfect balance between power and sound quality, offering remarkable sound pressure levels, yet retaining enough control to be considered audiophile in quality.
The new range of SW subwoofers comes with a host of new features. They now come with Non-pressed paper cones for increase self-damping, improved transient impact and intern increased the structural rigidity of the cone itself. The center vents are copper lined to reduce the magnetic distortion and improve the heat dissipation.
|
|
Wharfedale SW-10 (SW10) Subwoofer
|
|
SW-10 The SW series of subwoofers offer a level of performance previously unheard of in their class. Revolutionary drive units, amplifier modules and filter stages feature on every model. They strike the perfect balance between power and sound quality, offering remarkable sound pressure levels, yet retaining enough control to be considered audiophile in quality.
The new range of SW subwoofers comes with a host of new features. They now come with Non-pressed paper cones for increase self-damping, improved transient impact and intern increased the structural rigidity of the cone itself. The center vents are copper lined to reduce the magnetic distortion and improve the heat dissipation.
|
|
Origin SubA500 - Subwoofer Amplifier
|
|
SubA500
The subwoofer amplifier is the result of many years of research and development
dedicated to producing powerful, accurate bass in home
audio systems. This manual contains operating procedures and specifications.
We recommend you thoroughly read through the material
contained in this manual before connecting your amplifier. This will
ensure you have an understanding of how to setup and operate your
amplifier for optimum performance.
|
|
Origin SubA150 - Subwoofer Amplifier
|
|
SubA150
This amplifier is designed as a stand alone compact amplifier
that allows custom home installation to have a powerful high efficiency
amplifications while fitting in small places. The SUBA150 comes
with a set of standard ears that allow the user to install it in a standard
single rack mount. Whether you are looking to power a subwoofer or a
tactile transducer, the SUBA150 is guaranteed to deliver.
|
|
Origin OSUB10P Seasons Outdoor Patio Subwoofer
|
|
OSUB10P
Seasons Landscape Collection
Subwoofers for music and home theater are commonplace. In the Landscape Collection this same technology has been converted to withstand the harsh realities of an exterior environment. Encased in high-density composite materials the OSUB10P reproduces the deepest bass frequencies in unison with surrounding 8 ohm and 70 V speakers in the system.
Safeguarded from the Elements
|
|
Graham Audio SUB 3
|
|
Graham Audio Sub 3 Sub Woofer
A new compact passive sub-woofer, designed to be used in conjunction with the Graham Audio LS3/5, but also applicable to other designs of similar sensitivity and impedance.
It is designed to be used close to a rear wall, with the main speakers in their normal ‘free space’ position and has a front facing reflex port.
It has connections on the rear for the input from the amplifier and output to the main speakers. There is also provision for feet or spikes to be fitted into the base of the cabinet. The crossover uses high quality components, air core inductors for zero saturation distortion and polypropylene capacitors.
|
|
Tangent Spectrum XSW-8 (XSW8) Subwoofer
|
|
Spectrum XSW-8
Features:
•Unique satin finishes
•Closed Cabinet
•Front Firing
•Adjustable level, phase, and crossover (40Hz - 150Hz)
Tangent’s Spectrum range of affordable hi-fi and home theatre loudspeakers offer typically Danish contemporary, stylish designs fused with high-end audio quality from compact enclosures … to create the very best in two and multi-channel applications.
The range benefits from latest-technology
|
|
Page 9
( Displaying 10 of 259 Products )
|
|
Search for products that may contain the words:
within
using