The secret to great lighting is being able to control it. Match your activity or mood to your visual environment. Set the lights as you need them and the setting is automatically saved as one of your custom scenes. Retrieve it later at the touch of a button; no individual switches or dimmers to adjust again and again. The possibilities are endless. In your living room, you can pre-set the lighting controls to suit the way that you live “Cinema”, “Homework”, “Entertaining”, “Cleaning”. Then with a hand-held remote control (or even your universal TV remote), you can change the ambience of your room without leaving your chair. You can control all the lights in one room or indeed the whole house from just one button and control natural light with a motorised window solution. You can also link the lighting controls to your security and AV systems.
Control Units have both a maximum power capacity limit per zone and a maximum power capacity limit per unit. Each zone cannot exceed the total Watts listed on the product, and each unit cannot exceed the total Watts outlined for the product. However, the maximum unit capacity can be allocated among each individual zone in the unit. For example, on a 4-zone unit at 230V with a maximum zone capacity of 800W and a maximum unit capacity of 2300W, some zones will not reach the individual zone maximum because the total unit maximum cannot exceed 2300W. Check total unit maximums before ordering
|
Page 7
( Displaying 10 of 102 Products )
|
|
|
Rako RACUB - Wireless Twin Relay Motorised Controller
|
|
Rako Wireless Lighting RACUB - Mains Twin Relay Features
Rako Wireless Lighting Control RACUB - Mains Twin Relay for Screen Blind Control. Designed for use with electric blinds, screens and curtain tracks
Use with 240Vac motors, 12/24Vdc motors or motors with volt-free contact inputs
Use as part of a Mood Lighting scene setting configuration
Each open/close/up/down command can be activated by any Rako interface
|
|
Rako RAPSU Mains PSU for Battery-Less Control Plates
|
|
Rako Wireless Lighting RAPSU - 12vdc Power Supply - UK Features
Rako Wireless Lighting Control RAPSU - 12vdc Power Supply.
Fitted with UK 13Amp Plug
Used with Rako Interface modules and Battery-Less Keypads
Voltage 220-230VAC
|
|
Rako RCM-060 (RCM060) 6 Button Module Electronics
|
|
The RCM-060 wireless push button control module gives dual open, stop and close control for curtains, blinds & projector screens and is used with the Rako RACUB module or RAK4-R.
RCM wireless control modules have a new 'hard button' design and are styled to match the WCM wired control panels. RCM units are modules only and always require a front plate kit either RVF (screw-fixing) or RLF (screwless). Single gang RVF front plate kits have surface mount options. RLF and double gang options are for flush mounting only.
|
|
Rako RCM-030 (RCM030) 3 Button Module Wireless Electronics
|
|
The RCM-030 wireless push button control module gives open, stop and close control for curtains, blinds & projector screens and is used with the Rako RACUB module or RAK4-R.
RCM wireless control modules have a new 'hard button' design and are styled to match the WCM wired control panels. RCM units are modules only and always require a front plate kit either RVF (screw-fixing) or RLF (screwless). Single gang RVF front plate kits have surface mount options. RLF and double gang options are for flush mounting only.
|
|
Rako WCM-100 (WCM100) 10 Button Module Electronics
|
|
The WCM-100 connects to the RACOM wired CAT5 network pre configured for 7 scenes, off, raise & lower.
A hard wired 10 button push button control module that has several fixing options. Based upon the widely used 50x50mm Euro Module switch plate accessory standard. Rako flat plate and screwless switch plate kits are available in a selection of finishes including: White, Brushed, Stainless Steel, Mirrored Stainless Steel, Polished Brass, Black Nickel.
|
|
Rako WCM-070 (WCM070) 7 Button Module Electronics
|
|
The WCM-070 connects to the RACOM wired CAT5 network pre configured for 4 scenes, off, raise & lower.
A hard wired 7 button push button control module that has several fixing options. Based upon the widely used 50x50mm Euro Module switch plate accessory standard. Rako flat plate and screwless switch plate kits are available in a selection of finishes including: White, Brushed, Stainless Steel, Mirrored Stainless Steel, Polished Brass, Black Nickel.
|
|
Rako WCM-020 (WCM020) 2 Button Module Electronics
|
|
A hard wired 2 button push
button control module that has
several fixing options.
Based upon the widely used
50x50mm Euro Module switch
plate accessory standard. Rako flat plate and screwless switch plate kits are available in a selection of finishes including: White, Brushed, Stainless Steel, Mirrored Stainless Steel, Polished Brass, Black Nickel.
The WCM-020 push button control module comes pre-configured for
selecting scene 1 and off. Each button is complete with a blue LED
indicator and day-night etched buttons.
|
|
Rako RCM-020 - 2 Button Modular Control Panel
|
|
A wireless 2 button, push button
control module that has several
fixing options.
Lithium battery powered so can
be mounted anywhere without
having to run cabling. The unit
provides full scene
programming.
Based upon the widely used
50x50mm Euro Module switch
plate accessory standard.
Rako flat plate and screwless
switch plate kits are available in
a selection of finishes including:
Brushed Stainless Steel
Mirrored Stainless Steel
Polished Brass
White Metal
Black Nickel*
White Plastic
|
|
Rako RCM-070 7 Button Control Module
|
|
A wireless 7 button, push button
control module that has several
fixing options.
Lithium battery powered so can
be mounted anywhere without
having to run cabling. The unit
provides full scene
programming.
Based upon the widely used
50x50mm Euro Module switch
plate accessory standard.
WIRE-FREE CONTROL
The RCM070 push button control module comes pre-configured for
selecting 4 scenes, off and master raise & lower. The wall plate
controllers are designed to be mounted anywhere, be it flush
mounting to UK back-boxes or simply surface mounted to any flat
surface using the pattress provided**. It is also suitable for all switch
accessory plates that use a 50x50mm grid and cover plate
arrangement.Rako flat plate and screwless
switch plate kits are available in
a selection of finishes including:
Brushed Stainless Steel
Mirrored Stainless Steel
Polished Brass
White Metal
Black Nickel*
White Plastic
|
|
Rako RLED150CV1 Wireless 150W Constant Voltage LED Dimmer
|
|
A compact single channel
150W constant voltage LED
dimmer with in-built RF receiver
and Rako processor for control
of single channel constant
Controlled from any Rako
Rakom device, e.g. RCP/RCM
wall plates or Bridge interface
units.
Designed for use with single channel constant voltage LED fittings and
single channel LED tape light.
Maximum wattage of 150w for 12V d.c. fittings or 300w for 24V
d.c. fittings. Requires a suitable external d.c. power supply (normally
the power supply that would be supplied with the fitting for a nondimming
application).
|
|
Page 7
( Displaying 10 of 102 Products )
|
|
Search for products that may contain the words:
within
using