Rako are leading the way in providing state of the art digital dimming technology, manufacturing lighting systems that are simple to use, creative, easily installed and cost effective, making the Smart Home dream a reality. Recall a scene, or mood of lighting at the touch of a single button despite controlling multiple circuits and lamp types. Circuits are split to define zones and highlight room features and then programmed to suit the different uses of a space.
control all light fittings, including the dimming of LED's fluorescent lighting and low voltage fittings, saving energy and increasing lamp life as lamps are dimmed.
Advanced programming features allow master off control from any keypad or maybe a button to create a welcome home scene. The addition of a TCM time-clock module provides 'Holiday Mode' security, timed events and astro dawn/dusk programming.
|
Page 4
( Displaying 10 of 94 Products )
|
|
|
Rako RACUB-24DC (RACUB24DC) Twin Motorised Controller
|
|
Rako Wireless Blinds RACUB-24DC - Twin Relay for 24vDC powered Blind Control. Designed for use with 24vDC electric blinds, screens and curtain tracks
Use with 12/24Vdc motors only. Volt-free contacts, 1A max
Use as part of a Mood Lighting scene setting configuration
Each open/close/up/down command can be activated by any Rako interface
Continuous or momentary activation is provided, enabling full or partial opening of any controlled blind or curtain.
|
|
Rako RACUB-2L (RACUB2L) Twin Relay Motorised Controller
|
|
Rako Wireless Blinds RACUB-2L - 240vac Mains Motor Blind Control Features:-
Rako Wireless Blinds RACUB-2L - 240vac Mains Motor Blind Control. Designed for use with 240vac Mains Motor Blinds that need a Single Neutral, then L1 to open, L2 to close
Use with 240Vac motors only, 1A max
Use as part of a Mood Lighting scene setting configuration
Each open/close/up/down command can be activated by any Rako interface
|
|
Rako RCM-030 (RCM030) 3 Button Module Wireless Electronics
|
|
The RCM-030 wireless push button control module gives open, stop and close control for curtains, blinds & projector screens and is used with the Rako RACUB module or RAK4-R.
RCM wireless control modules have a new 'hard button' design and are styled to match the WCM wired control panels. RCM units are modules only and always require a front plate kit either RVF (screw-fixing) or RLF (screwless). Single gang RVF front plate kits have surface mount options. RLF and double gang options are for flush mounting only.
|
|
Rako RLED150CV1 Wireless 150W Constant Voltage LED Dimmer
|
|
A compact single channel
150W constant voltage LED
dimmer with in-built RF receiver
and Rako processor for control
of single channel constant
Controlled from any Rako
Rakom device, e.g. RCP/RCM
wall plates or Bridge interface
units.
Designed for use with single channel constant voltage LED fittings and
single channel LED tape light.
Maximum wattage of 150w for 12V d.c. fittings or 300w for 24V
d.c. fittings. Requires a suitable external d.c. power supply (normally
the power supply that would be supplied with the fitting for a nondimming
application).
|
|
Rako RLED30CV4 Wireless 4 Channel LED Dimmer
|
|
A compact 4 channel 30W per
channel, constant voltage LED
dimmer with in-built RF receiver
and Rako processor for control
of 4 channel constant voltage
LED fittings.
When used with RGBW fittings
each colour is allocated a
channel and can be individually
adjusted allowing complete
colour mixing. Simple colour
cycling is started/stopped using
the raise/lower buttons in a
Rako wallpanel or hand held
remote.
|
|
Rako RLED75CV1- Wireless 75w Constant Voltage Dimming LED Driver
|
|
A compact single channel 75W
constant voltage LED dimmer
with in-built RF receiver and
Rako processor for control of
single channel constant voltage
LED fittings.
Controlled from any Rako
Rakom device, e.g. RCP/RCM
wall plates or Bridge interface
units.
Designed for use with single channel constant voltage LED fittings and
single channel LED tape light.
Maximum wattage of 75w for 12V d.c. fittings or 150w for 24V d.c.
fittings. Requires a suitable external d.c. power supply (normally the
power supply that would be supplied with the fitting for a non-dimming
application).
|
|
Rako TCM - Upgrade module for the RA-Bridge
|
|
A time-clock and advanced
programming module that can
be connected to a RA-Bridge or
a WA-Bridge converting them to
RTC and WTC Bridges
respectively.
TCM (TIMECLOCK MODULE)
The TCM module, when fitted to a Bridge, gives the Rako system both
timed events and advanced programming features.
The TCM timeclock unit has a battery backed real-time clock which,
when connected, synchronises with internet time. The TCM also has a
full astronomic clock feature allowing timed events to be programmed
either on a fixed time, or based on Dawn/Dusk cycles.
|
|
|
|
|
|
|
|
|
|
|
Discontinued
|
|
|
|
Rako RA-Bridge - Interfaces With Wireless Receivers
|
|
A powerful network interface for
use with a Rako wireless system.
The RA-Bridge acts as a
programming interface as well
as having ethernet access for
app control via smartphones
and tablets.
The RA-Bridge provides the connection between the Rako wireless network
and a laptop running Rako's programming software RASOFT. A laptop
can connect to the RA-Bridge either directly using a crossover cable or,
using a router, via WiFi. The RA-Bridge allows full system configuration
and programming of a Rako wireless network.
|
|
Rako RAPIR - Presence Sensor
|
|
The RAPIR is a ceiling mounted 360o PIR motion sensor with Rakom RF capabilities
A ceiling mount PIR motion detector with a 360o sensor pattern. The unit is ideally suited to office and residential applications where automatic scene selection is required.
The RAPIR motion detector module allows scenes to be selected automatically via movement. In factory default setting, the unit will select scene 1 and off, with a timeout of 5 minutes. When configured with the RASOFT programming software, it is possibleto select which scene is activated and modify the timeout period. The RAPIR also listens to RCP push button wall plates, to enable and disable the PIR motion function when not required. Mounting is via a 64mm diameter ceiling cutout, where a plastic collar is fitted. The housing is then pushed into place without the need for fixing screws. This method of installation ideally suits plasterboard or solid ceilings as it avoids the need for rear access to the unit and protects the surrounding finish.
|
|
Rako RAK-4R 4 Channel Twin Relay Curtain and Blind Rack
|
|
The Rako RAK-4R is a four channel controller which can be used to operate most types of Curtain, Blinds and Screen motors.
The RAK4-R has a single L-N-Earth 230v ac input. Each of the four outputs comprise two uncommitted volt-free relays. The relays can be wired or switched to suit the specific motor connected to them. The RAK4-R provides auxiliary Live outputs that can be used to drive ac motors.
|
|
Page 4
( Displaying 10 of 94 Products )
|
|
Search for products that may contain the words:
within
using