Rako are leading the way in providing state of the art digital dimming technology, manufacturing lighting systems that are simple to use, creative, easily installed and cost effective, making the Smart Home dream a reality. Recall a scene, or mood of lighting at the touch of a single button despite controlling multiple circuits and lamp types. Circuits are split to define zones and highlight room features and then programmed to suit the different uses of a space.
control all light fittings, including the dimming of LED's fluorescent lighting and low voltage fittings, saving energy and increasing lamp life as lamps are dimmed.
Advanced programming features allow master off control from any keypad or maybe a button to create a welcome home scene. The addition of a TCM time-clock module provides 'Holiday Mode' security, timed events and astro dawn/dusk programming.
|
Page 5
( Displaying 10 of 94 Products )
|
|
|
Rako RAK-4F 4 Channel Dimming Rack
|
|
A four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. Each of the four channels can independantly control 0-10v, DSI or DALI dimmable lighting loads. The dimmer has four separate dimming channels that can control a total of 2400w of lighting. The RAK-4F requires a separate RF receiver (RxLink) which connects using standard CAT5 RJ45 sockets. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070
|
|
Rako RAK-4L 4 x 5A Channel Dimming Rack Leading Edge
|
|
RAK-4F dimmer units can be used as simple 4 channel packs or
joined to form multi-way stacks. 8, 12 and 16 channels stacks can
be formed using the wireless receiver RxLink or up to 32 channel
stacks using the wired system RAKLINK.
The RAK-4L units are designed to be centrally located in an electrical
cupboard, utility room or garage.
The RAK-4L leading edge dimmer can control up to 4800 watts of
mains dimmable lighting loads.
|
|
Rako RAK-4T (RAK4T) 4 Channel Railing Edge Dimming Rack
|
|
A four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. Hybrid IGBT design enables leading and trailing edge control of lighting loads, quietly and smoothly. The dimmer has four separated dimming channels that can control a total of 2400w/2000va of trailing edge dimmable lighting loads. In parallel with the 4 dimmer channel is a separate switched relay channel for LEDs or Fans or other non dimmed loads. The RAK-4 requires a separate RF receiver (RxLink) which connects using standard CAT5 RJ45 sockets. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070.
|
|
Rako RMS800 800W Ceiling Mount Switch Module External Aerial
|
|
The RMS800 in-line RF switch module for non
dimmable loads
Designed to fit in a ceiling void or cupboard, the RMS800 module
can control up to 800VA of mains non-dimmable lighting loads. The
unit can also be used for exterior lighting control applications, with
the use of a weatherproof IP rated enclosure.
16 Scene memory capacity, can be fully integrated into Rako wired
systems.
Easy set-up and manual On/Off control using the set-up button.
Full rising clamp terminals and mounting bracket for easy installation.
Programmed
|
|
Rako RDA800 Universal Control Module
|
|
A compact 800VA RF dimmer
for 1-10V, DALI and DSI
controllable loads.
Connected in-line before the first
lighting fitting the RMS800
enables switching of up to
800VA of 0-10V, DALI and DSI
controllable loads such as LED
drivers and dimmable
fluorescent ballasts.
Controlled from any Rako
Rakom RF device, for example
the RCP/RCM push button RF
wall-plates.
ANALOGUE CONTROL
Designed to fit in a ceiling void or cupboard, the RDA800 module
can control up to 800VA of 0-10V, DALI and DSI controllable lighting
loads. Control signal output mode (0-10V, DALI or DSI) is user
selectable via a connecting link. The unit can also be used for
exterior lighting control applications, with the use of a weatherproof
IP rated enclosure.
|
|
Rako RMT1200 Trailing Edge 1200W Ceiling Mount Dimmer External Aerial
|
|
A compact 1200w RF dimmer designed to be mounted in a ceiling void using an access panel or wall mounted in an electrical cupboard. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 1200w/1000va of trailing edge dimmable loads. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070 push button RF wallplates.
Designed to fit in a ceiling void using an access panel or an electrical cupboard, the RMT1200 capacative dimmer can control up to 1200 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
|
|
Rako RML500 - 500W Ceiling Mount Dimmer External Aerial
|
|
A compact 500w RF dimmer designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 500w of leading edge dimmable loads. Controlled from any Rako Rakom RF device, for example the RCM/RCP push button RF wall plate.
Designed to fit in a ceiling void or cupboard, the RML500 inductive dimmer can control up to 250 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
|
|
Rako RML250 - 250W Ceiling Mount Dimmer External Aerial
|
|
A compact 250w RF dimmer designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 250w of leading edge dimmable loads. Controlled from any Rako Rakom RF device, for example the RCM/RCP push button RF wall plate.
FLEXIBLE CONTROL
Designed to fit in a ceiling void or cupboard, the RML250 inductive dimmer can control up to 250 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
|
|
Rako WK-HUB (WKHUB) Wired ethernet HUB
|
|
WK-HUB
WHAT IS IT?
A powerful network interface
for use with a Rako wired
system.
A network and cloud interface
and a link between Wired and
Wireless systems.
Time based functionality as
well as conditional logic and
advanced system features.
The WK-HUB can be free
standing or wall mounted,
using the bracket provided.
Network interface for Rako wired systems with built in
cloud services interface, time and advanced
programming features.
|
|
Rako RK-HUB (RKHUB) Wireless ethernet HUB
|
|
RK-HUB
WHAT IS IT?
A powerful network interface
for use with a Rako wireless
system.
A network and cloud interface
with time based functionality as
well as conditional logic and
advanced system features.
The RK-HUB can be free
standing or wall mounted,
using the bracket provided.
Network interface for Rako wireless systems with built
in cloud services interface, time and advanced
programming features.
|
|
Page 5
( Displaying 10 of 94 Products )
|
|
Search for products that may contain the words:
within
using