New MCA multi-channel amplifiers are Crafted in Canada and perfectly match the new AVM 60 processor & MRX receivers.
To complement the NEW AVM 60 A/V Processor, Anthem introduces the new MCA 525, 325 and 225 power amplifiers. Available in 5, 3 and 2-channel configurations, these new MCA amplifiers feature more robust and efficient power and heavy-duty reliability. The new MCA Series delivers lower THD (total harmonic distortion) for more clean, pure sound and lower noise for a supremely quiet background.
Like all Anthem products the MCA 525, MCA 325 and MCA 225, designed and Crafted in Canada, are like no other amplifiers in the world: custom low noise high-power toroidal transformers; high-current bipolar output transistors; high-quality filter capacitors; advanced power supply regulators; oversized aluminum heatsinks; custom-designed dual binding posts; and patented auto-on/off circuitry. Superior craftsmanship that is reflected in clean, clear, audiophile-quality sound from top to bottom of the frequency spectrum.
Technical Specifications:-
POWER OUTPUT (PER CHANNEL)
(Continuous RMS, 20 Hz - 20 kHz, < 1% THD)
Impedance 8Ω 4Ω 2Ω
225 W 400 W 600 W
INPUTS / OUTPUTS
Inputs: Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)
Outputs: Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack)
SWITCHES
Front Panel: Power (On/Off)
Rear Panel: 3 On/Off Modes (Trigger, Manual, Auto)
THD at 100W
at 1 kHz: 0.0010%
at 20 kHz: 0.015%
IMD at 100 W
ITU-R (19 kHz + 20 kHz): 0.0005%
SMPTE (60 Hz + 7 kHz): 0.002%
Frequency Response, 20 Hz to 20 kHz
open circuit: ± 0.1 dB
8Ω: ± 0.1 dB
4Ω: ± 0.1 dB
2Ω: ± 0.2 dB
OTHER SPECIFICATIONS
SNR, IEC-A, ref. 225: W 120 dB
Power Bandwidth, -3 dB at 200 W into 8 ohms: 90 kHz
Slew Rate: 30 V/μs
Damping Factor, 20 Hz to 1 kHz: 300
Channel Separation, 100 Hz to 10 kHz: > 65 dB
Input Impedance (RCA / XLR): 10 kΩ / 15 kΩ
Input Sensitivity, 225 W into 8 Ω: 1.5 Vrms
Voltage Gain: 29 dB
POWER CONSUMPTION
MCA 525: 2.0 W 80 W 550 W 1200 W
MCA 325: 1.4 W 47 W 350 W 750 W
MCA 225: 1.0 W 35 W 240 W 500 W
DIMENSIONS
Height: 6-5/8" (16.9 cm)
Height with Rackmount Kit: 4U
Width: 17-1/4" (43.9 cm)
Depth: 18-1/8" (46 cm)
WEIGHT
MCA 525: 61 lb (27.5 kg)
MCA 325: 43 lb (19.5 kg)
MCA 225: 40 lb (18 kg)
POWER REQUIREMENT
120 V version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.