Powering the Future of Audio.
The revolutionary STR Integrated Amplifier is based on an entirely new technological platform, for true benchmark performance in stereo amplification. More power, more control, more connection options, and the most advanced technology available in a single, easy-to-use component.
Designed, engineered, and Crafted in Canada, the STR Integrated Amplifier combines the benefits of an advanced preamp with the power of a massive amplifier and processor. It includes leading-edge DAC, onboard Anthem Room Correction (ARC™), customizable bass manager for mono or stereo sub outs, MM and MC phono inputs—far more than the average integrated amp.
And it includes new generations of many of Anthem’s award-winning, audiophile-loving, review-praised digital signal processing innovations, delivering a noticeably higher level of audio performance realism.
This is the integrated amplifier with the power, features, connections and control to fuel your two-channel dreams, today and into tomorrow.
Technical Specifications:-
PHONO PREAMPLIFIER
The phono preamplifier is suitable for moving magnet and high-output moving coil cartridges
Input Impedance 100 Ω (MC), 47 kΩ (MM)
Input Capacitance 270 pF (MM)
Maximum Input (at 1 kHz for < 0.1% THD 20 Hz - 20 kHz) 3.6 mV (MC), 37.7 mV (MM)
Gain (default at 1 kHz, user adjustable ± 20 dB) 55 dB (MC), 35 dB (MM)
RIAA Response ± 0.1 dB (20 Hz to 20 kHz)
THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) 0.008% (MC), 0.005% (MM)
S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output) 82 dB (MC), 96 dB (MM)
PREAMPLIFIER
Frequency Response:
digital-in, 192 kHz 10 Hz - 50 kHz (+0.00, -0.50 dB)
digital-in, 96 kHz 10 Hz - 45 kHz (+0.00, -0.50 dB)
digital-in, 44.1 kHz 10 Hz - 20 kHz (+0.00, -0.03 dB)
analog-in, DSP mode 10 Hz - 40 kHz (+0.02, -0.20 dB)
analog-in, direct mode 10 Hz - 80 kHz (+0.00, -0.10 dB)
THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output)
digital-in, 44.1 kHz, 0 dBFS 0.0008%
analog-in, DSP mode, 1 Vrms input 0.0020%
analog-in, direct mode, 1 Vrms input 0.0020%
SNR (at 1 kHz, IEC-A, 2 Vrms output)
digital-in, 44.1 kHz, 0 dBFS 112 dB
analog-in, DSP mode, 2 Vrms input 110 dB
analog-in, direct mode, 2 Vrms input 120 dB
Maximum Output ( < 0.1% THD) 2.2 Vrms except analog-direct 3.3 Vrms
XLR Configuration Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted
POWER AMPLIFIER
Impedance 8Ω 4Ω 2Ω
Power Output (per channel)
(Continuous, 20 Hz - 20 kHz, < 1% THD) 200 W 400 W 550 W
THD (100 W) 0.002% (1 kHz), 0.015% (20 kHz)
IMD (100 W)
ITU-R (19 kHz + 20 kHz) 0.0007%
SMPTE (60 Hz + 7 kHz) 0.005%
SNR (IEC-A, ref. 200 W) 114 dB
Frequency Response (20 Hz - 20 kHz) ± 0.1 dB
Power Bandwidth (-3 dB at 200 W into 8 ohms) 80 kHz
Slew Rate 30 V/μs
Damping Factor (20 Hz - 1 kHz) 330
Channel Separation 101 dB (100 Hz), 61 dB (10 kHz)
POWER REQUIREMENT
120 V version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.
POWER CONSUMPTION
Standby 0.38 W (120V), 0.45 W (240V)
Standby + Network 1.1 W (120V), 1.2 W (240V)
Idle 40 W
Typical Use 250 W
High Output 500 W
DIMENSIONS
Height 6-3/4” (17.2 cm)
Width 17” (43.2 cm)
Depth (not including power cord) 17-1/2” (44.5 cm)
Weight (unpacked) 40 lb (18 kg)