VM610MONO
Dual Moving Magnet Mono Cartridge for Mono Vinyl LP records
Mono LP model with a conical bonded stylus in the body dedicated to monaural sound. Specialised internal wiring allows for reduced surface noise and stable sound reproduction.
•Aluminium cantilever
•Para-toroidal coils improve generating efficiency
•Mono body terminating left and right channels reduces surface noise
•Durable low resonance polymer housing
v
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.
Para-toroidal generating system
Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.
Mono body
For monaural operation, left and right channels should be connected. A mono body on which left and right terminals are connected internally reduces record noise which is primarily in the vertical direction and obtains a highly focused ‘centre’ sound image compared with stereo bodies.
Specialised 600 series mono body with internal wiring dedicated to monaural sound.
Conical Bonded Stylus
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely. Due to its stability, it has been used widely at radio stations.
Technical Specifications:-
Mounting: 1/2” centres
Frequency Response: 20 - 20,000Hz
Output Voltage: 3.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle: 23˚
Vertical Tracking Force Range: 1.8 – 2.2g (2.0g standard)
Stylus Shape: Conical Bonded
Stylus Size: 0.6 mil
Stylus Construction: Bonded Round Shank
Cantilever: Aluminium Pipe
Coil Impedance: 1,400Ω (1kHz)
Static Compliance: 35 x 10-6 cm/dyne
Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance: 47,000Ω
Recommended Load Capacitance: 100 – 200pF
Weight: 6.4g
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus: VMN10CB
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2