DrayTek Vigor 120 ADSL2+ - Ethernet Modem
The DrayTek Vigor 120 is an ADSL modem with an Ethernet connection; it is not a router but an ADSL Ethernet Modem.
The DrayTek Vigor 120 can be used in conjunction with a DrayTek dual WAN router, such as a DrayTek 2860 to provide dual WAN connectivity from the router’s WAN1 (ADSL/VDSL) and WAN2 (RJ45/Ethernet) ports.
For example the 2860 could have VDSL (such as BT Infinity) connected to WAN1 as the primary circuit, and ADSL connected to WAN2 (via a DrayTek Vigor 120) as a secondary circuit. (As shown in adjacent images).
These primary and secondary circuits could be used in failover mode, or concurrently where additional bandwidth is required as the norm. In for example remotes areas where broadband speeds are limited. The primary and secondary circuits could be from different ISPs (Internet Service Providers) to provide additional contingency.
Features:-
•ADSL, ADSL2 & ADSL2+ Ethernet Modem
•Ideal Partner for DrayTek dual-WAN products
•Ethernet Connection for client device (router, PC etc.)
•ADSL Parameters pre-set for UK ISPs (adjustable)
•Normally no setup/configuration of the Vigor 120 required
•Annex A & Annex M Compatible
•Bridge (pass) a single IP address or a whole public subnet
•IPv6 and IPv4 Compatible
•PPPoA Bridging compatible with ISPs running IPv6
•Ideal for apple™ Airport Extreme and Time Capsule
Technical Specification:-
Protocol Support:
•ANSI T1.413 Issue 2
•ITU-T G.992.1 G.dmt (ADSL)
•ITU-T G.992.2 G.lite
•ITU-T G.992.3 ADSL2
•ITU-T G.992.5 ADSL2+
•Annex L (READSL)
•Annex M
•PPPoA / PPPoE Bridging (WAN to LAN)
•RFC-2684 / RFC-1483
Built-in Diagnostics (WUI / CLI)
Physical Interfaces: •RJ11 - ADSL Line
•RJ45 - 10/100BaseT Ethernet (auto-sensing/MDI-X)
•Power Socket (9VDC)
Environmental:
•Operating : 0° ~ 40° C
•Storage : -25° ~ 70 ° C
•Humidity : 20% ~ 90% Non-Condensing
•Dimensions : 105 (W) x 90mm (D) 27mm (H) (mm)
•Power : 9VDC, 0.5A. AC/DC Adaptor included.
•Maximum Power : 4.5W