An Audiophile-Reference Grade cable, 'La Prima Donna' Analog Interconnect superdeeds The Myth Interconnect, and compliments the performance of high-end single-ended hardware.
A coaxial design of very sophisticated construction, the signal conductor comprises of a solidcore conductor 0.33mm sq of 7N purity silver (99.999997%), perfectly circular in cross-section. There are no less than 3 screens to fully protect the signal from the deleterious effects of EMI, ESI and RFI induced distortions. Uniquely, this asymmetrical coaxial cable is also available in balanced (symmetrical) configuration. Here the centre core is positive phase, the inner screen negative and the outer screen becomes 'earth'
The signal conductor has a dielectric of ultra low loss Foamed Polyethylene. The return conductor and inner screen comprise of 100% coverage pure copper foil and a close-lapped braid of silver-plated Ultra-Hi Purity-OFC™. This is sheathed in a PTFE (Teflon) separator. The outer screen is a close-lapped braid of silver-plated Ultra-Hi Purity-OFC™ and is grounded at source end only.
The clever bit is the layer of Vibrakill™ Neoprene™ sandwiched between the outer screen and the soft PVC jacket, virtually eliminating the effects of microphony and contributing greatly to the preservation of the accuracy and integrity of the signal.
We offer 'La Prima Donna' Analog using our most sophisticated RCA plug assembly-the awesome MACH3 frighteningly expensive constant-impedance Monocrystal™ Ag over Cu RCA plugs. A heavy, silver-plated brass body, with twin high tensile fixing screws, clamps the double-shielded assembly uniformly and without stress. This shield, which grips the cable, does so firmly but without compressing the cable, ensuring that the crucial characteristic impedance is maintained.-uniquely, their centre pins and conjugate bracket shields (designed to form a 'Faraday Cage'-a device designed to maximise RF screening) are both deep silver-plated Monocrystal™ Copper. In balance configuration we use our over-designed Monocrystal™MACH3 Ultima XLR plugs.
When terminating, the solder joints are formed with Supersolder™, our new ultra high purity silver and tin alloy wire, together with our unique, passive organic flux, ensuring a joint with vanishingly low resistance, ultra low chemical contaminants and very high strength.
It is sincerely recommended that you consider matching 'La Prima Dona' with either our SMS loudSpeaker cables or, for ultimate satisfaction, with our US2 Monocrystal™ Silver Speaker Cable. The complete cable-matching table is here.