As the first five-channel amplifier from Mark Levinson, the Nº535H sets the bar high. Using a semimono-block design like the Nº533H, the Nº535H can deliver 200W per channel into all five channels simultaneously. Twelve output transistors and large amounts of capacitance per channel ensure that this amplifier is more than capable of delivering realistic dynamics and transients with audiophile-grade detail and response for even the most demanding audio tracks.
The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.
Specifications:-
Communication and Control:
one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector
Frequency Response:
within 0.5dB from 10Hz to 20kHz
Inputs:
Five balanced XLR inputs; five unbalanced RCA inputs
Input Impedance:
60 kΩ (balanced); 30 kΩ (unbalanced)
Input Sensitivity :
2.83Vrms output at 130mVrms input
Rated Output Power into 8 ohms:
200W/ch (20Hz to 20kHz at
Signal-to-Noise Ratio:
Greater than 85dB, reference level: 2.83 Vrms
Gain:
26.8dB
Power Requirements:
100V~, 120V~, 230V~, factory set for destination country
Speaker Connections:
five pairs loudspeaker outputs with banana-plug sockets (banana-plug socket not available on the 230 VAC models)
Height:
(with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm)
Width:
17.75" (45.1cm)
Depth:
19.83" (50.4cm)
Weight:
Net weight: 98.5 lbs (44.7kg); Shipping weight: 108.5 lbs (49.2kg)
Power Consumption:
1000W