Origin A2150
Origin Acoustics is the team that invented the architectural
loudspeaker speaker category over thirty years ago. Today that
same team is producing the finest in-ceiling and in-wall speakers
available. These speakers represent patented, state-of-the-art
technology that has resulted in unparalleled sound quality that
blends seamlessly into any décor.
An amplifier should be transparent, it should literally be just
wire with gain. At Origin we pride ourselves in offering nocompromise
amplifiers to drive our loudspeakers. Whether
you require a stereo or multi-channel version, our amplifiers
feature high-efficiency, Class-D power that is built to last and
will reproduce every nuance of every recording.
Features:-
• A2150 - Two Channel, Stereo Amplifier
At 150 watts of power for the A2150 and 50 watts for the A1250, plus the ability to consistently drive a 4-ohm load, this is a
workhorse that can be used as a building block in any system. Its automation and protection circuits serve to make it perfect
choice for home theater or multi-room/multi-zone applications.
• Class-D Power
This switching type amplifier class has incredible efficiency, above 90%, as higher power is demanded. This means
substantially less heat is produced even though the amplifier is able to produce substantial power. This also means a reduction
in size as smaller heat sinks are required and the electronic circuitry can be more compact and reside in a smaller chassis.
• Bridgeable Circuit
Bridging two channels into one drives almost triple the power into a single output. This feature creates greater flexibility in
system design when additional power is a requirement.
• Automation
Origin amplifiers can be place in a rack or inside furniture and require no direct access to function. They are turned on out
of standby mode either by sensing the audio signal from a preamp or receiver or by a 12-volt signal from any number of
components. They also have a 12-volt output to trigger other components as necessary.
• Protection
Built-in circuits that sense both thermal overload or a short-circuit in the speaker connections, will shut down the amplifier
until the temperature level returns to normal operating levels or the short in the connections is corrected. This protects the
amplifier from permanent damage and avoids costly service visits and repairs.
Technical Specifications:-
Continuous Power Output(All Channels): 150 watts RMS at 4 ohms,95 watts RMS at 8 ohms
Bridged Power Output (All Channels): 280 Watts per channel RMS at 8 ohms
Input Sensitivity: 1000mV
Input Impedance: 20,000 ohms
AUTO ON (Audio Sense) Sensitivity: 2.5mV
12 Volt Trigger Input: 12V DC; 10K Ohms
12 Volt Trigger Output: 12V DC; 10mA
S/N ratio: 95 dB
Frequency Response: 20 Hz to 20 kHz
Distortion (Un-bridged): 0.1% THD 20 Hz-20 kHz
Distortion (Bridged): 0.1% THD 20 Hz-20 kHz
Input Voltage: 115V AC/230V AC
Fuse (115V AC): T4AL 250V
Fuse (230V AC): T2.5AL 250V
Dimensions: 17.7”W x 3.5”H x 13.4”D (450W x 89H x 340D mm)
Weight: 13.1 lb (5.94 kg)
Certification Meets FCC Part 15, ETL Listed and tested under UL/EN60065