P12 Mains Regenerator
Features:-
•Built in Boulder
•1200 VA output
•3X lower impedance than P5
•8 outlets US
•15 amp AC input US
•120 volt regulated US
•Range 95 – 145 VAC US
•4 EU/AU/GR/UK outlets
•10 amp AC input EU/AU/GR/UK
•230 volt Regulated EU/AU/GR/UK
•Range 200 –285VAC EU/AU/GR/UK
•100% regenerated AC
•4 outlets
•MultiWave
•Pure Sine Wave
•Integrated oscilloscope
•THD meter
•Improvement meter
•Power meter
•Control over the LAN
•Adjustable output voltage
•Color touchscreen
•Field upgradable
•48 pounds boxed
•17W x 4H x 14D
The DirectStream Power Plant 12 is the successor to the venerable P5 Power Plant. The P12 is completely redesigned from the ground up with three times lower output impedance, lower distortion, a new FPGA based DSD sine wave generator, and an improved level of performance never before attained by any Power Plant of its size. Power Plants take your incoming AC power and regenerate new sine-wave-perfect, regulated high current AC power. In the process of regeneration any problems on your power line such as low voltage, distorted waveforms, sagging power and noise are eliminated. The results are both audibly and visually stunning when powering either audio or video products. Further, the level of protection afforded connected equipment is extraordinary. Feel 100% confident that a P12 will provide pure and safe power under any condition.
The DirectStream Power Plant 12 features an all new analog power amplifier and FPGA sine wave generator based on pure, clean, analog DSD (PDM). The P12 is our most powerful compact regenerator with 1250 watts of pure power. From medium to large power amplifiers to the smallest pieces of source equipment, the P12 will work magic on your system’s performance. Dynamics and openness are breathtaking with the P12.
This is clearly one of the most important pieces of audio equipment you can own. Expect far better micro and macro dynamics as well as a cleaner, lower noise background.
Don’t starve your music or risk damaging your equipment. A P12 gives you greatly improved performance and safety from just plugging into the wall socket and far better dynamics, bass and a much bigger, open soundstage than any passive power conditioner on the market. Why settle for anything but a Power Plant?
Environment Specification:-
Location: Indoor use only
Duty Cycle: Suitable for continuous operation
Moisture Sensitivity: Not sealed against moisture
Operating Humidity: < 80%rh
Storage Temperature: -40C to +40C
Operating Temperature: 0C to 40C
Max Operating Altitude: 12,000’ (3500m)
Electrical Supply Nominal Rating: 230V 10A 50/60Hz
Instrument Specification:-
Unit Dimensions: 17” W x 14” D x 4” H (43cm W x 36cm D x 10.16 cm H)
Unit Weight: 37 lbs ( 16.7kg)
Shipping Dimensions: 24” x 21” x 10” ( 61cm x 53cm x 25cm)
Shipping Weight: 48 lbs (21.7kg)
Nominal Input Voltage: 200 –285VAC
Maximum Continuous Load: 1200VA
Maximum Peak Load: 3800VA
Voltage Regulation: 1V
Output Distortion (Resistive Load): < 0.9%
Output Distortion (Reactive Load): < 0.9% / 0.1% typical
Output Impedance: < 0.008 ohm
Noise Reduction: 100kHz – 2MHz > 80dB
Efficiency @ 1200 VA: > 85%
Input Frequency: 45 – 65 Hz
Under Voltage Limit: Continuous -10% of setting 15 sec duration -15% of setting
Over Voltage Limit: Continuous 5% of setting 15 sec duration 10% of setting
Energy Dissipation: 1270J
Peak Current Surge: 90,000A
Max Surge Voltage: 6,000V
Clamp Level: 800V
DC Trigger Configuration: Tip Positive
DC Trigger Voltage: 5 – 15Vdc