The CR50 projector lift is Pure Theatre's most popular projector mount used to hide your projector into the ceiling when it's not being used.
The CR50 Lift fits all of the most poular 4K projectors allowing you to be future proof for years to come.
Latest Projectors for the CR50 Lift are:
•Epson 7400 Epson 9400 Epson 9400W
•Sony VPL-VW270 Sony VPL-VW570
Optoma UHD60 Optoma UHD65 Optoma UHZ65
The CR50 will fit in standard 8" joists, with a distance of 595mm between joists. It is normal to trim a section from one joist to fit the lift.
Looking from the rear view the width required above the plasterboard cutout is 750mm.
Note that the minimum width above the plasterboard is wider then the plasterboard cutout, as the actuators are wider and these step over the plasterboard when installed.
A unique lightweight aluminium construction encases the projector whilst retaining a smooth exterior profile.
This enables home owners to have a fully recessed lift mechanism that is only seen when it’s meant to be.
All lifts are designed with installation in mind, and can easily be fitted to standard ceilings creating the most compact in-ceiling projector lifts available.
The unique mounting system means you don’t even have to paint the ceiling after fitting.
Technical Specifications:-
Model:
CR50-LFT
Lift Dimensions (W x D x H):
70cm x 67cm x 21cm
Max. Projector (W x D x H):
54cm x 52cm x 19cm (extendable to 22cm)
Travel:
16cm
Lifting Capacity:
35 kg
Raise / Lower time:
5 seconds
Noise:
35 decibels
Power Supply:
100-240VAC 50/60Hz
Power Usage:
max: 375W / Stationary
Warranty:
5 years return to base
Weight:
19 Kg
Packaged Weight (Kg):
25.0000
Box Height:
33.0000
Box Width:
78.0000
Box Length:
80.0000