The RAMVR is a wireless interface module for third
party presence sensors.
The RAMVR integrates third party presence sensors into a Rako wireless
system where Rako's RAPIR may not be suitable, such as external use. It
also allows sensors using other detection methods such as break-beam or
microwaves to be used.
The RAMVR is mains powered and allows direct connection to sensors that
switch mains power. The module also has isolated volt-free inputs
connections for dry contact or DC logic inputs.
The module can be manually addressed or programmed using Rasoft Pro
for more advanced programming.
Programming functions include:-
Set scene only when lights are off – Allows lights to be dimmed without the
PIR overriding.
Auto off – Turns lights off when no movement is detected.
Exit delay – Allows users to manually turn lights off before the PIR becomes
active again.
Other Room Controllers disable Auto-Off – A manual wallplate can disable
the auto-off function, allowing long periods of inactivity without turning
lights off.
The RAMVR can also be used to interface mains voltage, non-sensor type
inputs into a Rako wireless system.
Note: The RAMVR is not intended primarily for connection to volt-free, nonsensor
inputs where the RMR-VF provides a more flexible solution.
v
Technical Specifications:-
Dimensions: 172x46x40mm
Input supply: 230V AC +/-10% 50Hz
Weight: 180g
Housing: UL V0 ABS
Climate range: Temperature +2C to +40C
Humidity +5% to 95% non
condensing
Connections: Screw terminal
Standards: Emissions - EN61000-6-3 : 2007
Immunity - EN61000-6-1 : 2007
LVD - EN 60950-1 :2006
Communication: Rakom coded fm radio, 433.9MHzv
Memory: Flash memory (non volatile)