Rako RAVIR Interface

IR to RF Interface. Use Any Learning Remote To Operate Rako Modules.

The elegance of any Rako system is demonstrated not only by its simplicity of operation, but also by the number of control options available. The RAVIR is one such option, allowing the use of any standard learning remote control to operate your Rako lights as well!

The RAVIR will convert standard Infra Red commands into RAKO RF commands. This can be achieved either through a dedicated IR receiver or as part of an IR control system, such as those designed by SpeakerCraft.

All the functions of an RCP07 keypad can be accessed, such as scene selection and fader levels. Through the RAVIR, non-dimming modules, such as the screen and curtain controller, can also be controlled by a learning RCU.

When the RAVIR is programmed using RASOFT, up to four rooms can be independently controlled via the same, or multiple, remote control(s). All 15 available channels within each room can be independently controlled enabling ‘real time’ tailoring of all lights.

Since any channel can also control the RACUB relay module, the independent control of motorised curtains and screens is also possible.

SPECIFICATIONS
Overview:Use standard IR remote control to operate single or multiple Rako Dimming Modules.
Example Uses:
Home Theatre System.
Combine AV Equipment & Lighting Control onto a single remote.