A compact single channel
150W constant voltage LED
dimmer with in-built RF receiver
and Rako processor for control
of single channel constant
Controlled from any Rako
Rakom device, e.g. RCP/RCM
wall plates or Bridge interface
units.
Designed for use with single channel constant voltage LED fittings and
single channel LED tape light.
Maximum wattage of 150w for 12V d.c. fittings or 300w for 24V
d.c. fittings. Requires a suitable external d.c. power supply (normally
the power supply that would be supplied with the fitting for a nondimming
application).
Programmed using either an RCM/RCP RF wallplate or the RASOFT PC
software suite, the unit stores the house, room and channel address plus16 preset scene levels in non volatile memory.
The RLED150CV1 dimmer can be controlled from any Rako transmitter
such as RCM/RCP wallplates, RAH hand helds and Bridge modules
and forms the foundation of any Rako scene-set system.
Specifications:-
dimensions 138x46x40mm
input supply 12 or 24vDC
weight 107g
housing UL V0 ABS
climate range Temperature +2C to +40C
Humidity +5% to 95% non
condensing
connections 2 way screw terminals for 12-24v
d.c. supply.
4 way screw terminals for load
connections.
protection Reverse polarity input protection.
Output current limit protection.
load types Single channel constant voltage LED
fittings and tapelight.
minimum load 1w
maximum load 150w @ 12v d.c.
300w @ 24v d.c.
terminal sizes 4mm2
standards Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
communication Rakom coded fm radio, 433.9MHz
memory Flash memory non volatile