A compact 500w RF dimmer designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 500w of leading edge dimmable loads. Controlled from any Rako Rakom RF device, for example the RCM/RCP push button RF wall plate.
Designed to fit in a ceiling void or cupboard, the RML500 inductive dimmer can control up to 250 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
With protection features such as field replaceable fuse, over-temperature and voltage surge protection.
Programmed using either an RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the House, Room and Channel address plus 16 preset scene levels in non volatile memory.
The RML500 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand helds and Bridge modules and is the ideal accessory to any Rako scene-set system.
Specifications:-
dimensions 138x46x40mm
input supply 230V AC +/-10% 50Hz
weight 125g
housing UL V0 material
climate range Temperature +2C to +40C
Humidity +5% to 95% non
condensing
connections 3 way screw terminals for mains
power
protection Field replaceable fuse
Auto thermal shutdown
Voltage surge protection
load types Incandescent mains voltage lamps,
Leading edge dimmable transformers
Leading edge dimmable cold cathode
minimum load 20w
maximum load 500VA Refer to Rako when
dimming GU10 style LEDs
terminal sizes 4mm - Solid
standards Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
communication Rakom coded fm radio, 433.9MHz
memory Flash memory (non volatile)