The RMS800 in-line RF switch module for non
dimmable loads
Designed to fit in a ceiling void or cupboard, the RMS800 module
can control up to 800VA of mains non-dimmable lighting loads. The
unit can also be used for exterior lighting control applications, with
the use of a weatherproof IP rated enclosure.
16 Scene memory capacity, can be fully integrated into Rako wired
systems.
Easy set-up and manual On/Off control using the set-up button.
Full rising clamp terminals and mounting bracket for easy installation.
Programmed using either an RCM/RCP RF wall-plate or RASOFT PC
software suite, the RMS800 stores the House, Room and Channel
address plus 16 preset scene levels in a non-volatile memory.
The RMS800 can be controlled from any Rako transmitter such as
RCM/RCP wallplates, RAH hand-helds and Bridge modules and
forms the foundation of any Rako wireless scene-set system.
Specifications:-
dimensions 138x46x40mm
input supply 230V AC +/-10% 50Hz
weight 205g
housing UL V0 material
climate range Temperature +2C to +40C
Humidity +5% to 95% non
condensing
connections 3 way screw terminals for mains
power
protection Auto resetting over current protection
Auto thermal shutdown
Voltage surge protection
load types All non dimmable lighting loads e.g.
Extractor fans and water pumps.
minimum load N/A
maximum load 800VA
terminal sizes 4mm2
standards Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
communication Rakom coded fm radio, 433.9MHz
memory Flash memory (non volatile)