WLED150CV1
WIRED 150W CONSTANT VOLTAGE LED DIMMER.
WHAT IS IT?
A compact single channel
150W constant voltage LED
dimmer with in-built wired
receiver and Rako processor for
control of single channel
constant voltage LED fittings.
Controlled from any Rako
Wired device, e.g. WCM,
WAPIR or from wireless devices
via a WA/WTC-Bridge or a
WRB100.
Designed for use with single channel constant voltage LED fittings and
single channel LED tape light.
Maximum wattage of 150W for 12V d.c. fittings or 300w for 24V d.c.
fittings. Requires a suitable external d.c. power supply (normally the
power supply that would be supplied with the fitting for a non-dimming
application).
Programmed using the RASOFT PC software suite, the unit stores the
house, room and channel address plus 16 preset scene levels in non
volatile memory.
Connection to the Rakom wired network can be via the RJ11 lead,
plugging into a RAKLink or RAKStar unit. Alternatively a WPCON or
WPCONC unit can be used as a remote plug in connection point.
Installing a Bridge or WRB100 as part of the wired system will allow the
WLED150CV1 to receive commands from wireless devices as part of a
“combined” or “hybrid” system.
Technical Specifications:-
Dimensions: 172x46x40mm
Input supply: 12V/24V DC power supply depending on load, 12-18V DC supply from Rako wired network for control
Housing: UL V0 ABS
Weight: 175g
Climate Range: Temperature +2C to +40C, Humidity +5% - 90% non condensing
Connections: 2 way screw terminals for 12-24v, DC supply. 2 way screw terminals for load connections
Protection: Reverse polarity input protection / Output current limit protection
Load types: Single channel constant voltage LED fittings and tape
min/max loads Min: 1W
Max: 150W @ 12V DC / 300W @ 24V DC
Terminal sizes: 4 mm2
Standards: Emissions - EN61000-6-3 : 2007 / Immunity - EN61000-6-1 : 2007
Communication: Rakom wired network
Memory: Flash memory (non volatile)