Unico Primo Phono
The Unico Primo is a hybrid stereo integrated amplifier capable of comfortably delivering 85W RMS continuous power to an 8Ω load. Even though this is the entry level in the Unico line, it possesses many of the outstanding sonic qualities of Unison Research's more high-end amplifier models. By making this a hybrid design, where a power amplifier is combined with an ECC83 triode, you get the best of both worlds with the Unico Primo. It's an amplifier that's powerful enough to drive most loudspeakers, and a sound quality and performance that can only be achieved with advanced valve designs.
The Unico Primo input and pre-amplifier stages have been designed to suit a ECC83 (12AX7) valve, while the driver and power stages are based on well-established Unison Research solutions that have been used previously on higher-end designs. The power supply has been revised against previous models, increasing the power transformer and filter capacitors in order to improve dynamics, bass response and drive capability.
The Unico Primo is designed to accomodate all modern and traditional sources, with its four Line inputs and dedicated Phono (MM/MC) input for connecting a turntable. There is also a Tape Out option, and an active stereo output for a connecting a powered subwoofer to your system. Switching between inputs is easy with the stylish dial on the front panel, and volume control is managed by the large, smooth rotary pot in the middle of the face-plate. The casework is based on other models in the Unico range, and the faceplate is similarly fashioned and supplied in Unison Research's iconic sand-blasted silver finish.
The aluminium front panels on all Unico series products are clean and stylish thanks to a new sandblasting and anodizing process. The sandblasting consists of hammering the the aluminium plate with microscopic ceramic balls at room temperature to give the surface a homogeneous and opaque finish. The anodizing process facilitates the growth of a thin film of aluminium oxide on the surface, which enhances the mechanical resistance and hardness of the surface. The end-result is truly stunning to help round off this prestigious piece of equipment.
Key Features:
•Hybrid integrated amplifier
•ECC83 valve employed inside
•MM/MC phono stage built-in for connecting a turntable
•4 Line inputs
•Bi-wirable speaker outputs
•Premium sand-blasted Black* & Silver finish
•RC2 remote included
Technical Data:
Output Power: > 80W RMS (8Ω)
Output Stage:
Dynamic Class A POWER MOSFET
(complimentary pair)
Polarization: Class A Dynamic
Input Stage: Triode A - Class A
Valves: 1 x ECC83 (12AX7)
Sensitivity: 260mV
Input Impedance: 50kΩ / 47pF
Frequency Response: -0.1dB @ 10Hz / -0.5dB @ 100kHz
SNR: 90dB
THD:
0.15% @ 10W (1kHz)
Damping Factor: > 50
Inputs:
4 x Line (RCA)
1 x Tape (RCA)
Output:
1 x Tape (RCA)
1 x Subwoofer (RCA)
Speaker Outputs: 4 + 4 for Bi-Wiring
Remote Control: Volume commands
Power Consumption: 380W (max.)
Dimensions (W x D x H): 43.5 x 43 x 9.5cm
Net Weight: 14kg
*Black finish is available to Special Order.