CON-H2-EDID
HDMI In-line Signal Re-Clocker with EDID Management, Automatic or Manual CEC, Audio De-embed and Relay Triggering
A multi-purpose installer tool, the CON-H2-EDID can perform a variety of tasks within an install. As an in-line device it can act as an EDID manager to request specific content from a source or as an audio de-embedder, extracting HDMI source audio via the S/PDIF or stereo mini-jack ports. Additionally it can be a micro zone controller, sending CEC and RS-232 power triggers to connected projectors or screens and from its two relay ports, can trigger devices in the zone using signal presence logic.
Features:-
•HDMI in & HDMI out with re-clocking and equalisation (HDMI range extender)
•Breakout of source audio via mirrored S/PDIF and stereo mini-jack
•In-line EDID manager with assignable presets or copy & import capability
•Assignable relays triggered on signal presence or via RS-232
•Source sensing power triggering
CEC: Compatible screens or projectors triggered manually via API or automatically on signal presence
Serial: Power on/off commands can be stored and sent via RS-232 port
•Setup & configuration via simple PC configuration tool (WyreStorm Management Suite v1.6 or higher)
•Relay momentary or latching control
•Powered by 12v DC power supply (US, UK, EU and AU PSU pins included)
•Mounting brackets included
•USB-3-pin phoenix cable required for setup (not included) - Use P/n CAB-USB-PX1
Technical Specifications:-
AUDIO & VIDEO
Inputs 1x HDMI in: 19-pin type A
Outputs
1x HDMI Out: 19-pin type A
1x Audio Out: 3.5mm (1/8in) TRS Stereo
1x S/PDIF Out: S/PDIF Coaxial Digital
Audio Formats
HDMI Pass-through 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
S/PDIF Out: De-Embed: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
Analog Out: 2ch
Video Resolutions (Max)
1920x1080p @60Hz 12bit - HDMI 15m/49ft
3840x2160p @24Hz 10bit 4:2:0 HDR - HDMI 7m/23ft
3840x2160p @30Hz 8bit 4:4:4 - HDMI 7m/23ft
3840x2160p @60Hz 10bit 4:2:0 HDR - HDMI 5m/16ft
3840x2160p @60Hz 12bit 4:2:2 HDR - HDMI 3m/10ft
4096x2160p @60Hz 8bit 4:2:0 - HDMI 7m/23ft
4096x2160p @60Hz 8bit 4:4:4 HDMI 5m/16ft
Supported Standards DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100
Maximum Pixel Clock 600MHz
COMMUNICATION & CONTROL
HDMI:
HDMI 2.0 | HDCP 2.2 | EDID | CEC Triggering
Inputs supports DVI/D and DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included)
CEC: CEC Power Triggering | Requires CEC compatibility
RS-232: 1x RS-232: 3-pin Terminal Block - 3.5mm
Relays: 1x Relay 2: 3-pin Terminal Block - 3.5mm | 1x Relay 1: 3-pin Terminal Block - 3.5mm | Max 1A load
POWER
Power Supply 12V DC 0.5A
Max Power Consumption < 2W
ENVIRONMENTAL
Operating Temperature: 32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing
Storage Temperature: -4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing
Maximum BTU: 7 BTU/hr
DIMENSIONS & WEIGHT
Rack Units/Wall Box < 1U
Height 20mm/0.79in
Width 120mm/4.73in
Depth 80mm/3.15in
Weight 0.23kg/0.51lbs
REGULATORY
Safety and Emission CE | FCC | RoHS | RCM