Wyrestorm HDMI over IP Streaming Transmitter for Matrix function.
•For use with the NHD-100-RX H.264 decoder to provide a complete end-to-end streaming system
•Features 1 x HDMI input to 1 x LAN (PoE) output
•Provides streaming output via Ethernet port
•Supports input signal resolution up to 1920 x 1200 @ 60Hz
•Highly scalable, visually lossless solution using the most efficient compression technologies to allow for very large commercial AV deployments
•Plug and Play setup with quick networking configuration and auto discovery of components
•Quick Sync™ technology for virtually instantaneous seamless switching
•Full RS232 control of connected displays and CEC One-Touch Play
•Major control systems drivers available including the WyreStorm Enado™ Control System
•Supports video previewing on a PC or third party device. Capable of outputting two simultaneous IP streams. One large IP stream supports a streaming resolution from 480p @ 60Hz to 1920 x 1200 @ 60Hz to view a video on the decoder. The other small one supports resolutions of 352 x 288 @ 5Hz to easily preview a video from the encoder on a PC or Mac
•Use with the new NetworkHD controller (NHD-000-CTL) for matrix control and management via the LAN, as well as for allowing control from third party control system such as AMX, Crestron, Control4, RTI & Enado.
•Supports PoE to be remotely powered from the switch by compatible power source equipment, eliminating the need for a nearby power outlet
•Standards-based H.264/MPEG-4 AVC video compression
•Full PC control suite available free of charge at wyrestorm.com
•Supports HDCP
•Supports the H.264 features baseline profile, main profile and high profile
•Auto input format detection
•Configurable encoding bit rate up to 40 Mbps
•Supports AutoIP, zero-configuration networking (zeroconf), a set of technologies that automatically assigns dynamic IP addresses to the Encoder on start-up and a server-less method of choosing IP addresses
In the Box:-
1 x NHD-100-TX Main Unit
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
2 x Phoenix Conn. (Male, 3.5 mm, 3 pins)
2 x Mounting brackets
1 x Quickstart Guide
Technical Specifications:-
Dimensions (WxHxD): 200mm x 25 mm x 94mm / 7.9’’ x 1.0’’ x 3.7’’
Weight (Kg): 0.48 Kg / 1.05lbs
Input Video Signal: 0.5 - 1.2V p-p
Input DDC Signal: 5V p-p (TTL)
Power Supply: 12V 1A DC
Power Consumption: 6W (Max.)
Rack Space Required: N/AOperating Temperature: +32°F ~ +113°F (0°C ~ +45°C) 10% ~ 90%, non-condensing
Storage Temperature: -4°F ~ 140°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing
Input Video Ports: 1 × HDMI IN
Input Video Type: HDMI 1.3
Input Video Resolution:
HDMI: 640 x 480 @ 60Hz, 480i @ 60Hz, 480p @ 60Hz, 576i @ 50Hz, 576p @ 50Hz, 800 x 600 @ 60Hz, 1024 x 768 @ 60Hz, 720p @ 50Hz, 720p @ 60Hz, 1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz, 1360 x 768 @ 60Hz, 1366 x 768 @ 60Hz, 1400 x 1050 @ 60Hz, 1440 x 900 @60Hz, 1680 x 1050 @ 60Hz, 1080p @ 24Hz, 1080p @ 25Hz, 1080p @ 30Hz, 1080p @ 50Hz, 1080p @ 60Hz, 1920 x 1200 @ 60Hz
Output Video Ports: 1 x LAN
Output Video Type: H.264/MPEG-4 AVC
Output Video Resolutions: Large IP stream: 480p @ 60Hz ~ 1920 x 1200 @ 60Hz, Small IP stream: 352 x 288 @ 5Hz
Video Impedance: 100 Ω
Encoding Data Rate: Up to 30 Mbps, configurable
End-to-End Time Latency: About 60 ms-90 ms (Low latency mode), About 250 ms-300 ms (High quality mode)
Input Audio Format: Stereo (from HDMI)
Output Audio Ports: 1 x Phoenix Connector
Output Audio Format: Stereo
Control Method: Rear panel source switch, PC configurator and RS232
ESD Protection: ±8kV (air-gap discharge) ±4kV (contact discharge)
Surge Protection: Voltage ±1 kV
Certification: CE, FCC, RoHS compliant