RXV-70-4K-G2
4K HDR 4:4:4 60Hz HDBaseT™ Receiver for MXV H2A-70 matrix with Bidirectional IR, RS-232 & PoH (4K: 70m/230ft)
4K HDR HDMI-Over-HDBaseT Receiver (2160p 4:4:4/60: 70m/230ft | 1080p: 100m/328ft). Consumer HDMI content is now breaking through the once comfortable HDBaseT “ceiling” of 10Gbps, with HFR (High Frame Rate). HDR is here already in the form of Blu-ray, Satellite & Cable (HLG) and gaming content. The RXV-70-4K-G2 is the perfect companion for WyreStorm's MXV line-up of matrices also when distances of under 70 meters are required. This is the perfect solution for the TX-H2X-VLC modular card, found in the H2XC line.
Features:-
For use exclusively with Class A 6x6 & 8x8 MXV-H2A-70 range of matrix switchers
•Uses WyreStorm's proprietary compression technology for lossless transmission of 4K HDR content, without latency
•Reliable HDBaseT-HDMI conversion over distance using single Cat6 cable
•4K UHD signals up to 70m/230ft (2160p 4:4:4 60Hz 8-bit) and 2K signals up to 100m/230ft (1200p 60Hz 16-bit)
•Supports HDMI2.0 video standard up to 18Gbps
•Compatible with HDR standards including HDR-10, HDR-10+, HLG and Dolby Vision (Dolby Vision supported up to 30Hz)
•Class A HDBaseT™ supporting the transmission of video, multichannel audio, bidirectional control and PoH
•Powered remotely via PoH from MXV matrix
•HDCP 2.2 compatibility
•Bidirectional IR supported with both IR TX & RX ports
•RS-232 port for routed 2-way serial communication
•LED indication for HDCP presence within signal and transmission link between devices
•Ventilated steel chassis
•Conforms to IEEE-568B standards
•Compact design for convenient and unobtrusive installation
•Wall mounting brackets and IR accessories included
Technical Specifications:-
AUDIO & VIDEO
Inputs: 1x HDBaseT™ In: 8-pin RJ-45 Female
Outputs: 1x HDMI Out: 19-pin type A
Output Video Encoding: HDBaseT™ Class A
Encoding Data Rate: 9.2Gbps
End to End Latency: 10μs (micro seconds)
Audio Formats: HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
Video Resolutions (Max):
Video Resolutions:-
1920x1080p @ 60Hz 12bit
1920x1080p @ 120Hz 12bit
3840x2160p @ 24Hz 10bit 4:2:0 HDR
3840x2160p @ 30Hz 8bit 4:4:4
3840x2160p @ 60Hz 10bit 4:2:0 HDR
3840x2160p @ 60Hz 12bit 4:2:2 HDR
4096x2160p @ 60Hz 8bit 4:2:0
HDMI:-
15m / 49ft
7m / 23ft
15m / 49ft
7m / 23ft
5m / 16ft
5m / 16ft
7m / 23ft
Cat6:-
100m / 328ft
70m / 230ft
100m / 328ft
70m / 230ft
70m / 230ft
70m / 230ft
70m / 230ft
Cat6a/7:-
100m / 328ft
100m / 328ft
100m / 328ft
100m / 328ft
100m / 328ft
100m / 328ft
100m / 328ft
Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.
Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock: HDMI: 600MHz | HDBaseT™: 297MHz
COMMUNICATION & CONTROL
HDMI: HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI-D supported with adapter (not included)
HDBaseT™: HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR
CEC: Power Triggering for connected screens - Requires CEC compatibility
IR: 1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo | Bidirectional over HDBaseT™
RS-232: 1x RS-232: 3-pin Terminal Block - 3.5mm
POWER
Power Supply: 18V DC (Optional)
PoH : 1-way Matrix to Receiver
Max Power Consumption: 12.42W
ENVIRONMENTAL
Operating Temperature: 0 ~ +45°C (32 ~ +113 °F), 10% ~ 90%, non-condensing
StorageTemperature: -20 ~ +70°C (-4 ~ +158 °F), 10% ~ 90%, non-condensing
Maximum BTU: 43 BTU/hr
DIMENSIONS & WEIGHT
Rack Units: < 1U
Height With: 15.2mm/0.6in
Width With: 136.4mm/5.38in
Depth With: 74.2mm/3.93in
Weight: 0.24kg/0.53lbs
REGULATORY
Safety and Emission: CE | FCC | RoHS | RCM