TX-H2X-HDBT
HDBaseT Input, HDBaseT™ Output and Mirrored HDMI Output with Audio Input, DSP Output and IR to zone (4K: 70m/230ft | 1080p: 100m/328ft)
De-centralize sources connected to the H2X matrix platform with this HDBaseT™ input & output card. Accepting 4K UHD transmissions from 70m/230ft, this modular card allows source devices to be kept in-situ whilst making them part of the main distribution system.
Class A HDBaseT™
Both the input and output side of this card offers HDBaseT™ 5-Play connectivity, passing AV, Control, Ethernet and PoH for both the RX and TX devices.
The WyreStorm Eco-system
Used in line with WyreStorm's range of HDBaseT™ devices, signals can be sent from single transmitters, switching transmitters or even presentation switchers to create a multi-layered switching environment.
AUDIO DSP
No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, level trim and variable delay, which can be set per zone for a truly customized room-by-room balance.
4K UHD WITH HDR OVER HDBaseT™
Multi-zone transmission of HDR-10 content is nothing new to WyreStorm; we’ve been sending this high-bandwidth content, native & uncompressed over long distances since the introduction of our first H2 extender in 2015. The H2X is no different and with the TX-H2X-HDMI, sending pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 100m/328ft.
FEATURES:-
•HDBT Input - Enables the direct connection of a remote source to the matrix via an HDBaseT™ Transmitter only at the source location, rather than an HDBaseT™ extender set previously required to distribute a remote signal over distance to a matrix. The matrix will then route the remote source signal as it does with any locally connected source.
•HDBaseT™ Output- Transmitting Class A HDBaseT™ which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
•HDMI Output - Mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
•Stereo Audio Output - Offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
•S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
•S/PDIF Audio Input - Another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
•IR RX - Allows control signals to be sent to the sink device.
Specifications:-
Audio and Video
Inputs:
1x HDMI In19-pin type A
1x S/PDIF In Coaxial Digital
1x HDBaseT™ 8-pin RJ-45 female
Outputs:
1x HDBaseT™ 8-pin RJ-45 female
1x S/PDIF Out Coaxial Digital
1x Audio Out 3pin Phoenix Connector
Outputs Video Encoding: HDBaseT™ Class A
Encoding Data Rate: 9.2Gbps
End to End Latency: 10μs (micro seconds)
Audio Formats: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
Communication and Control:-
HDMI: HDCP 2.2 | DVI-D supported with adapter (not included)
HDBaseT™: HDMI | HDCP 2.2 | 1-way PoH to Receiver | IR RX to Receiver
IR: 1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT™
RS-232: Matrix Control | Bidirectional over HDBaseT™ | Firmware Updates
Ethernet: From Matrix - No Connection on card | Bidirectional over HDBaseT™
ARC (Audio Return Channel): Returns audio from displays built-in applications via ARC HDMI Input over HDBaseT™ (Requires ARC or SCL Receiver)
Power:-
Power Supply: Internal to Matrix
Max Power Consumption: Matrix Dependent
PoH: 48V 15.4W
Environmental:-
Operating Temperature: Matrix Dependent
StorageTemperature: Matrix Dependent
Maximum BTU: Matrix Dependent
Regulatory:
Safety and Emission Matrix Dependent